diff --git a/config.json b/config.json index c2b89bd..3f6157a 100644 --- a/config.json +++ b/config.json @@ -406,6 +406,14 @@ "prerequisites": [], "difficulty": 4 }, + { + "slug": "all-your-base", + "name": "All Your Base", + "uuid": "db7caf7b-a9db-452d-830c-7840f6aa03fc", + "practices": [], + "prerequisites": [], + "difficulty": 5 + }, { "slug": "camicia", "name": "Camicia", diff --git a/exercises/practice/all-your-base/.docs/instructions.md b/exercises/practice/all-your-base/.docs/instructions.md new file mode 100644 index 0000000..1b688b6 --- /dev/null +++ b/exercises/practice/all-your-base/.docs/instructions.md @@ -0,0 +1,28 @@ +# Instructions + +Convert a sequence of digits in one base, representing a number, into a sequence of digits in another base, representing the same number. + +~~~~exercism/note +Try to implement the conversion yourself. +Do not use something else to perform the conversion for you. +~~~~ + +## About [Positional Notation][positional-notation] + +In positional notation, a number in base **b** can be understood as a linear combination of powers of **b**. + +The number 42, _in base 10_, means: + +`(4 × 10¹) + (2 × 10⁰)` + +The number 101010, _in base 2_, means: + +`(1 × 2⁵) + (0 × 2⁴) + (1 × 2³) + (0 × 2²) + (1 × 2¹) + (0 × 2⁰)` + +The number 1120, _in base 3_, means: + +`(1 × 3³) + (1 × 3²) + (2 × 3¹) + (0 × 3⁰)` + +_Yes. Those three numbers above are exactly the same. Congratulations!_ + +[positional-notation]: https://en.wikipedia.org/wiki/Positional_notation diff --git a/exercises/practice/all-your-base/.docs/introduction.md b/exercises/practice/all-your-base/.docs/introduction.md new file mode 100644 index 0000000..68aaffb --- /dev/null +++ b/exercises/practice/all-your-base/.docs/introduction.md @@ -0,0 +1,8 @@ +# Introduction + +You've just been hired as professor of mathematics. +Your first week went well, but something is off in your second week. +The problem is that every answer given by your students is wrong! +Luckily, your math skills have allowed you to identify the problem: the student answers _are_ correct, but they're all in base 2 (binary)! +Amazingly, it turns out that each week, the students use a different base. +To help you quickly verify the student answers, you'll be building a tool to translate between bases. diff --git a/exercises/practice/all-your-base/.meta/config.json b/exercises/practice/all-your-base/.meta/config.json new file mode 100644 index 0000000..fd57180 --- /dev/null +++ b/exercises/practice/all-your-base/.meta/config.json @@ -0,0 +1,20 @@ +{ + "authors": [ + "IsaacG" + ], + "files": { + "solution": [ + "all_your_base.gd" + ], + "test": [ + "all_your_base_test.gd", + "run_tests", + "lib/test_runner.gd", + "project.godot" + ], + "example": [ + ".meta/example.gd" + ] + }, + "blurb": "Convert a number, represented as a sequence of digits in one base, to any other base." +} diff --git a/exercises/practice/all-your-base/.meta/example.gd b/exercises/practice/all-your-base/.meta/example.gd new file mode 100644 index 0000000..b31ec0d --- /dev/null +++ b/exercises/practice/all-your-base/.meta/example.gd @@ -0,0 +1,19 @@ +func rebase(input_base, digits, output_base): + if input_base < 2 or output_base < 2: + return null + + var value = 0 + for digit in digits: + if digit < 0 or digit >= input_base: + return null + value = value * input_base + digit + + if value == 0: + return [0] + + var rebased = [] + while value > 0: + rebased.append(value % output_base) + value /= output_base + rebased.reverse() + return rebased diff --git a/exercises/practice/all-your-base/.meta/template.j2 b/exercises/practice/all-your-base/.meta/template.j2 new file mode 100644 index 0000000..a11a063 --- /dev/null +++ b/exercises/practice/all-your-base/.meta/template.j2 @@ -0,0 +1,12 @@ +{% for case in cases %} +func test_{{ case.func_name }}(solution_script): + var got = solution_script.{{ case.property | camel_to_snake }}({{ case.input.inputBase | togdscript }}, {{ case.input.digits | togdscript }}, {{ case.input.outputBase | togdscript }}) +{%- if not case.expect_error %} + var want = {{ case.expected | togdscript }} +{%- else %} + var want = null +{%- endif %} + return [got, want] + +{% endfor %} + diff --git a/exercises/practice/all-your-base/.meta/tests.toml b/exercises/practice/all-your-base/.meta/tests.toml new file mode 100644 index 0000000..8968c13 --- /dev/null +++ b/exercises/practice/all-your-base/.meta/tests.toml @@ -0,0 +1,73 @@ +# This is an auto-generated file. +# +# Regenerating this file via `configlet sync` will: +# - Recreate every `description` key/value pair +# - Recreate every `reimplements` key/value pair, where they exist in problem-specifications +# - Remove any `include = true` key/value pair (an omitted `include` key implies inclusion) +# - Preserve any other key/value pair +# +# As user-added comments (using the # character) will be removed when this file +# is regenerated, comments can be added via a `comment` key. + +[5ce422f9-7a4b-4f44-ad29-49c67cb32d2c] +description = "single bit one to decimal" + +[0cc3fea8-bb79-46ac-a2ab-5a2c93051033] +description = "binary to single decimal" + +[f12db0f9-0d3d-42c2-b3ba-e38cb375a2b8] +description = "single decimal to binary" + +[2c45cf54-6da3-4748-9733-5a3c765d925b] +description = "binary to multiple decimal" + +[65ddb8b4-8899-4fcc-8618-181b2cf0002d] +description = "decimal to binary" + +[8d418419-02a7-4824-8b7a-352d33c6987e] +description = "trinary to hexadecimal" + +[d3901c80-8190-41b9-bd86-38d988efa956] +description = "hexadecimal to trinary" + +[5d42f85e-21ad-41bd-b9be-a3e8e4258bbf] +description = "15-bit integer" + +[d68788f7-66dd-43f8-a543-f15b6d233f83] +description = "empty list" + +[5e27e8da-5862-4c5f-b2a9-26c0382b6be7] +description = "single zero" + +[2e1c2573-77e4-4b9c-8517-6c56c5bcfdf2] +description = "multiple zeros" + +[3530cd9f-8d6d-43f5-bc6e-b30b1db9629b] +description = "leading zeros" + +[a6b476a1-1901-4f2a-92c4-4d91917ae023] +description = "input base is one" + +[e21a693a-7a69-450b-b393-27415c26a016] +description = "input base is zero" + +[54a23be5-d99e-41cc-88e0-a650ffe5fcc2] +description = "input base is negative" + +[9eccf60c-dcc9-407b-95d8-c37b8be56bb6] +description = "negative digit" + +[232fa4a5-e761-4939-ba0c-ed046cd0676a] +description = "invalid positive digit" + +[14238f95-45da-41dc-95ce-18f860b30ad3] +description = "output base is one" + +[73dac367-da5c-4a37-95fe-c87fad0a4047] +description = "output base is zero" + +[13f81f42-ff53-4e24-89d9-37603a48ebd9] +description = "output base is negative" + +[0e6c895d-8a5d-4868-a345-309d094cfe8d] +description = "both bases are negative" diff --git a/exercises/practice/all-your-base/all_your_base.gd b/exercises/practice/all-your-base/all_your_base.gd new file mode 100644 index 0000000..d46e8de --- /dev/null +++ b/exercises/practice/all-your-base/all_your_base.gd @@ -0,0 +1,2 @@ +func rebase(input_base, digits, output_base): + pass diff --git a/exercises/practice/all-your-base/all_your_base_test.gd b/exercises/practice/all-your-base/all_your_base_test.gd new file mode 100644 index 0000000..a75e2cf --- /dev/null +++ b/exercises/practice/all-your-base/all_your_base_test.gd @@ -0,0 +1,124 @@ +func test_single_bit_one_to_decimal(solution_script): + var got = solution_script.rebase(2, [1], 10) + var want = [1] + return [got, want] + + +func test_binary_to_single_decimal(solution_script): + var got = solution_script.rebase(2, [1, 0, 1], 10) + var want = [5] + return [got, want] + + +func test_single_decimal_to_binary(solution_script): + var got = solution_script.rebase(10, [5], 2) + var want = [1, 0, 1] + return [got, want] + + +func test_binary_to_multiple_decimal(solution_script): + var got = solution_script.rebase(2, [1, 0, 1, 0, 1, 0], 10) + var want = [4, 2] + return [got, want] + + +func test_decimal_to_binary(solution_script): + var got = solution_script.rebase(10, [4, 2], 2) + var want = [1, 0, 1, 0, 1, 0] + return [got, want] + + +func test_trinary_to_hexadecimal(solution_script): + var got = solution_script.rebase(3, [1, 1, 2, 0], 16) + var want = [2, 10] + return [got, want] + + +func test_hexadecimal_to_trinary(solution_script): + var got = solution_script.rebase(16, [2, 10], 3) + var want = [1, 1, 2, 0] + return [got, want] + + +func test_15_bit_integer(solution_script): + var got = solution_script.rebase(97, [3, 46, 60], 73) + var want = [6, 10, 45] + return [got, want] + + +func test_empty_list(solution_script): + var got = solution_script.rebase(2, [], 10) + var want = [0] + return [got, want] + + +func test_single_zero(solution_script): + var got = solution_script.rebase(10, [0], 2) + var want = [0] + return [got, want] + + +func test_multiple_zeros(solution_script): + var got = solution_script.rebase(10, [0, 0, 0], 2) + var want = [0] + return [got, want] + + +func test_leading_zeros(solution_script): + var got = solution_script.rebase(7, [0, 6, 0], 10) + var want = [4, 2] + return [got, want] + + +func test_input_base_is_one(solution_script): + var got = solution_script.rebase(1, [0], 10) + var want = null + return [got, want] + + +func test_input_base_is_zero(solution_script): + var got = solution_script.rebase(0, [], 10) + var want = null + return [got, want] + + +func test_input_base_is_negative(solution_script): + var got = solution_script.rebase(-2, [1], 10) + var want = null + return [got, want] + + +func test_negative_digit(solution_script): + var got = solution_script.rebase(2, [1, -1, 1, 0, 1, 0], 10) + var want = null + return [got, want] + + +func test_invalid_positive_digit(solution_script): + var got = solution_script.rebase(2, [1, 2, 1, 0, 1, 0], 10) + var want = null + return [got, want] + + +func test_output_base_is_one(solution_script): + var got = solution_script.rebase(2, [1, 0, 1, 0, 1, 0], 1) + var want = null + return [got, want] + + +func test_output_base_is_zero(solution_script): + var got = solution_script.rebase(10, [7], 0) + var want = null + return [got, want] + + +func test_output_base_is_negative(solution_script): + var got = solution_script.rebase(2, [1], -7) + var want = null + return [got, want] + + +func test_both_bases_are_negative(solution_script): + var got = solution_script.rebase(-2, [1], -7) + var want = null + return [got, want] diff --git a/exercises/practice/all-your-base/lib/test_runner.gd b/exercises/practice/all-your-base/lib/test_runner.gd new file mode 100644 index 0000000..be91311 --- /dev/null +++ b/exercises/practice/all-your-base/lib/test_runner.gd @@ -0,0 +1,541 @@ +class_name TestRunner +extends SceneTree + + +class ErrorReader: + """ErrorReader reads from a STDERR file (cmd 2>/file). + + It filters out the less useful Godot output and handles retrieving lines iteratively. + """ + + const EXPECTED_GODOT_ERRORS = [ + ( + "ERROR: Could not create directory: /root/.local\n" + + " at: make_dir_recursive (core/io/dir_access.cpp:180)\n" + ), + ( + "ERROR: Error attempting to create data dir: " + + "/root/.local/share/godot/app_userdata/[unnamed project].\n" + + " at: ensure_user_data_dir (core/os/os.cpp:344)\n" + ), + ( + "ERROR: Could not create editor data directory: /root/.local/share/godot\n" + + " at: EditorPaths (editor/editor_paths.cpp:183)\n" + ), + ( + "ERROR: Could not create directory: /root/.config\n" + + " at: make_dir_recursive (core/io/dir_access.cpp:180)\n" + ), + ( + "ERROR: Could not create editor config directory: /root/.config/godot\n" + + " at: EditorPaths (editor/editor_paths.cpp:198)\n" + ), + ( + "ERROR: Could not create directory: /root/.cache\n" + + " at: make_dir_recursive (core/io/dir_access.cpp:180)\n" + ), + ( + "ERROR: Could not create editor cache directory: /root/.cache/godot\n" + + " at: EditorPaths (editor/editor_paths.cpp:219)\n" + ), + ( + "ERROR: Can't save resource to empty path. " + + "Provide non-empty path or a Resource with non-empty resource_path.\n" + + " at: save (core/io/resource_saver.cpp:105)\n" + ), + ( + "ERROR: Error saving editor settings to \n" + + " at: save (editor/editor_settings.cpp:1013)\n" + ), + ] + var already_processed_bytes: int = 0 + var filename: String = "" + var color_sequence = RegEx.create_from_string("\\e\\[\\d[\\d;]*m") + + func _init(filename: String) -> void: + self.already_processed_bytes = 0 + self.filename = filename + if not self.filename.is_empty() and ResourceLoader.exists(self.filename): + self.get_error_message() + + func check() -> Error: + if not FileAccess.file_exists(self.filename): + push_error("STDERR must be redirected to '%s' when using '--json'" % self.filename) + return ERR_FILE_NOT_FOUND + if OS.get_stderr_type() != OS.STD_HANDLE_FILE: + push_error("STDERR must be redirected to '%s' when using '--json'" % self.filename) + return ERR_FILE_NOT_FOUND + return OK + + func get_error_message() -> String: + """ + Checks the contents of the STDERR file, where error output from the + currently running test suite should be stored. If there is any relevant output + there, this method will return it. If the file is empty, an empty string is returned. + + This method will remove previously read output from the returned message. It should + be called after executing every test, to ensure that the message contains only output + relevant for the given test. + + NOTE: running a Godot instance without full access to certain folders in the + home directory (`~/.config`, `~/.local`, `~/.cache`) will result in additional + errors. This happens when GDScript test runner is executed in Docker. However, + these errors do not stop the execution of the program, so they can be ignored. + This method filters them out, leaving only the errors caused by the actual tests. + """ + if self.filename.is_empty(): + return "" + + var error_output = FileAccess.get_file_as_string(self.filename) + error_output = error_output.erase(0, self.already_processed_bytes) + self.already_processed_bytes += len(error_output) + + # By default, Godot's error messages are printed with colors. To include the output in the + # `results.json` file, color markers need to be removed first. + error_output = self.color_sequence.sub(error_output, "", true) + + # Filter out the expected error messages + for expected_error in EXPECTED_GODOT_ERRORS: + error_output = error_output.replace(expected_error, "") + + return error_output + + +class ResultWriter: + var json_file: String = "" + var stderr: ErrorReader = null + + func _init(json_file: String, stderr: ErrorReader) -> void: + self.json_file = json_file + self.stderr = stderr + + func delete_existing() -> Error: + """ + Removes the previous `results.json` file, to ensure that the current test suite will not use it. + """ + if self.json_file.is_empty(): + return OK + if FileAccess.file_exists(self.json_file): + DirAccess.remove_absolute(self.json_file) + var error_message: String = self.stderr.get_error_message() + if not error_message.is_empty(): + push_error(error_message) + return FAILED + return OK + + func write(results: Dictionary) -> Error: + """ + If output_dir_path is empty, outputs friendly-formatted test results to + stdout. + + Otherwise, writes JSON results to results.json in the given path. + """ + if self.json_file.is_empty(): + return print_friendly_results(results) + return write_results_file(results) + + func print_friendly_results(results: Dictionary) -> Error: + """ + Prints rich results to stdout. + """ + var rich_results = [""] + if results.status == "pass": + rich_results.push_back("[color=yellow]Exercise passed! Nicely done![/color]") + else: + rich_results.push_back("Exercise has at least one failed test:") + for test in results.tests: + if test.status == "pass": + rich_results.push_back(" %s [color=yellow]passed ✔[/color]" % test.name) + else: + rich_results.push_back( + " %s [color=pink]failed: %s[/color]" % [test.name, test.message] + ) + print_rich("\n".join(rich_results)) + return OK + + func write_results_file(results: Dictionary) -> Error: + """ + Saves a dictionary as a `results.json` file in the output directory. The file + is indented with 4 spaces, keys are not sorted. + + The `results` dictionary represents the full output of a single exercise's + test suite, according to the Test Runner Interface documentation: + + https://exercism.org/docs/building/tooling/test-runners/interface + + This method automatically adds `'version' = 2` to the results. + """ + # Due to keys not being sorted, `version` should be inserted first + var full_results = {"version": 2} + full_results.merge(results) + + var pretty_results = JSON.stringify(full_results, " ", false) + + var results_json = FileAccess.open(self.json_file, FileAccess.WRITE) + if results_json == null: + var err = FileAccess.get_open_error() + push_error("Failed to write the file: %s (%s)" % [self.json_file, error_string(err)]) + return err + + results_json.store_string(pretty_results + "\n") + return OK + + +class ArgParser: + """ArgParser reads the cmdline and parses inputs and options.""" + + var solution_script_path: String = "" + var test_suite_script_path: String = "" + var run_all: bool = false + var json: bool = false + var json_file: String = "" + + func usage(message: String) -> void: + print("Usage:") + print("test_runner [--all] [--json filename.json] ") + if not message.is_empty(): + print() + print(message) + + func parse_args() -> Error: + """ + Validates the number of args passed to the script and sets values of the following + global variables, based on the given args: + * `solution_script_path` + * `test_suite_script_path` + """ + var args = OS.get_cmdline_user_args() + var positional: Array = [] + + var idx := 0 + while idx < len(args): + var arg = args[idx] + if arg == "--all": + run_all = true + elif arg.begins_with("--json"): + if arg.contains("="): + var parts = arg.split("=", true, 1) + if parts[0] == "--json": + self.json = true + self.json_file = parts[1] + else: + usage("Invalid flag %s" % arg) + return ERR_INVALID_PARAMETER + elif idx + 1 < len(args): + self.json = true + self.json_file = args[idx + 1] + idx += 1 + else: + usage("Flag %s is missing a filename" % arg) + return ERR_INVALID_PARAMETER + elif arg.begins_with("--"): + usage("Invalid flag %s" % arg) + return ERR_INVALID_PARAMETER + else: + positional.append(arg) + idx += 1 + + if len(positional) != 2: + usage("Expecting 2 positional args but got %d" % len(positional)) + return ERR_INVALID_PARAMETER + + var slug = positional[0] + var solution_dir_path = positional[1] + + # Test folders use dashes, but test files use underscores + var gdscript_path = solution_dir_path.path_join(slug.replace("-", "_")) + + self.solution_script_path = gdscript_path + ".gd" + self.test_suite_script_path = gdscript_path + "_test.gd" + + return OK + + func files() -> Array: + return [self.solution_script_path, self.test_suite_script_path] + + +class Runner: + var test_suite: Object = null + var solution: Object = null + var stderr: ErrorReader = null + var result_writer: ResultWriter = null + + func _init( + test_suite: Object, solution: Object, stderr: ErrorReader, result_writer: ResultWriter + ) -> void: + self.test_suite = test_suite + self.solution = solution + self.stderr = stderr + self.result_writer = result_writer + + func extract_methods() -> Dictionary: + """Extract the source code of a method from a script.""" + var in_func: bool = false + var parts = [] + var methods: Dictionary = {} + var name: String = "" + var func_re: RegEx = RegEx.create_from_string("^func ([^(]+)\\(") + for line in self.test_suite.get_script().source_code.split("\n"): + if not in_func: + var matched = func_re.search(line) + if matched: + in_func = true + name = matched.get_strings()[1] + parts = [] + elif not line.begins_with("\t") and not line.begins_with(" "): + if in_func: + in_func = false + methods[name] = "\n".join(parts) + else: + parts.append(line) + + return methods + + func get_failed_test_message(actual, expected) -> String: + """ + Generates a message for a failed test. If given values are strings, + this method will wrap them in single quotes, to distinguish from + other types, like integers (e.g. '3' vs 3). + + This method should be used if the actual and expected values for a + given test are different, or if they have different types. + """ + var values = [] + + for value in [actual, expected]: + var formatted_value = str(value) + if typeof(value) == TYPE_STRING: + formatted_value = "'{0}'".format([formatted_value]) + values.append(formatted_value) + + return "Expected output was {1}, actual output was {0}.".format(values) + + func run_tests() -> Array: + """ + Runs the given test suite agains the given solution script. Returns an Array + representing the results of each test case, in the same order that they are defined + in the test suite. Each test result is a Dictionary containing 3 values: + + * `name`: the name of the test case + * `status`: 'pass', 'fail', or 'error' + * `message`: null if the test passed, otherwise it contains the details of the failure/error + + This method will look for methods starting with `test_` in the test script, and + then call them with the solution script as the only argument. The `test_` method's + name will be used as the `name` value for each test result. + + If any stderr output was generated during the execution of the `test_` method, + `status` will be set to 'error'. The test will also receive an 'error' status + if calling the `test_` method returned null (which indicates execution issues). + + Otherwise, the `test_` method should return an Array of 2 elements: the actual value, + and the expected value. The values will be compared and if they are the same, the test will + pass. Otherwise, it will fail, with a relevant message being set by this method. + """ + var test_results = [] + var test_codes = self.extract_methods() + + for method in self.test_suite.get_method_list(): + if not method["name"].begins_with("test_"): + continue + var test_method_name = method["name"] + print("-> " + test_method_name) + var test_method = self.test_suite.get(test_method_name) + + var output = test_method.call(self.solution) + var error_message = self.stderr.get_error_message() + + if output == null: + ( + test_results + . append( + { + "name": test_method_name, + "status": "error", + "message": error_message, + } + ) + ) + else: + var actual = output[0] + var expected = output[1] + + var passed = ( + typeof(actual) == typeof(expected) + and actual == expected + and error_message.is_empty() + ) + + var status = "error" + if error_message.is_empty(): + status = "pass" if passed else "fail" + error_message = ( + null if passed else self.get_failed_test_message(actual, expected) + ) + + var test_code = test_codes[method["name"]] + # The code would be cleaner if the test suite actually checked the values. + # Instead, the test suite returns an array with two values which are compared (above). + # This `replace()` hides some of that implementation detail by communicating that the + # array elements are being compared for equality. + test_code = test_code.replace("return [", "assert_equal [") + test_code = test_code.replace("\t", " ") + test_code = test_code.dedent().strip_edges() + + ( + test_results + . append( + { + "name": test_method_name, + "status": status, + "message": error_message, + "test_code": test_code, + } + ) + ) + + return test_results + + func run(run_all: bool) -> void: + """ + Executes the current suite against the current solution. Stores the results in the + `results.json` file in the output dir. + """ + var test_results = run_tests() + var results = {} + + # Check if any tests were executed + if len(test_results) == 0: + results = {"status": "error", "message": "No tests were executed.", "tests": []} + else: + results = {"status": "pass", "tests": test_results} + + # If any of the tests failed, change the global status to `fail` + for test_result in test_results: + if test_result["status"] != "pass": + results["status"] = "fail" + break + + if not run_all and results["status"] != "pass": + var success_count: int = 0 + for test_result in test_results: + if test_result["status"] == "pass": + success_count += 1 + + var has_failure = false + var filtered_results = [] + for test_result in test_results: + if test_result["status"] == "pass": + filtered_results.append(test_result) + elif not has_failure: + has_failure = true + test_result["message"] = ( + "Passes %d/%d tests. First failure: %s" + % [ + success_count, + len(test_results), + test_result["message"], + ] + ) + filtered_results.append(test_result) + results["tests"] = filtered_results + + self.result_writer.write(results) + + +func load_solution(path: String) -> Object: + """Load a script. This helper is needed to catch failures without aborting the error handling.""" + if not FileAccess.file_exists(path): + return null + var re = RegEx.create_from_string("^( )+") + var replace = RegEx.create_from_string("( )+") + var changed = false + var lines = [] + for line in FileAccess.open(path, FileAccess.READ).get_as_text().split("\n"): + var m = re.search(line) + if m == null: + lines.append(line) + else: + changed = true + var new = [] + for i in range(m.get_end() / 4): + new.append("\t") + new.append(line.substr(m.get_end())) + lines.append("".join(new)) + if not changed: + return load(path).new() + + path = OS.get_temp_dir() + "/solution.gd" + FileAccess.open(path, FileAccess.WRITE).store_string("\n".join(lines)) + var solution = load(path).new() + DirAccess.remove_absolute(path) + return solution + + +func load_solution_script( + solution_script_path: String, result_writer: ResultWriter, stderr: ErrorReader +) -> Array: + """ + Loads the solution script and saves it in a global variable. In case of any + issues, this method will save the `results.json` file with `error` status. + """ + # Make sure the STDERR file is empty. + stderr.get_error_message() + var solution_script = load_solution(solution_script_path) + + if solution_script == null: + var message: String = "The solution file could not be parsed." + # Extract the error message, up until the "Failed to load" line + # which is specific to the test runner, not the user's solution. + var error_message: String = stderr.get_error_message() + if not error_message.is_empty(): + var msg = [] + var stop = ( + 'ERROR: Failed to load script "%s" with error "Parse error".' % solution_script_path + ) + for line in error_message.split("\n"): + if line == stop: + break + msg.append(line) + message += "\n" + "\n".join(msg) + var results = {"status": "error", "message": message, "tests": []} + result_writer.write(results) + return [null, ERR_PARSE_ERROR] + + return [solution_script, OK] + + +func _init(): + # Calling `quit(1)` doesn't stop the program immediately, so a `return` is necessary. + # That's why errors are checked directly in `_init()`, instead of calling `quit(1)` + # in each method. + var args = ArgParser.new() + if args.parse_args() != OK: + quit(1) + return + for file in args.files(): + if not ResourceLoader.exists(file): + push_error("File %s not found." % file) + quit(1) + return + + var stderr = ErrorReader.new("/tmp/stderr") + if args.json and stderr.check() != OK: + quit(1) + return + + var result_writer = ResultWriter.new(args.json_file, stderr) + if result_writer.delete_existing() != OK: + quit(1) + return + + var r = load_solution_script(args.solution_script_path, result_writer, stderr) + if r[1] != OK: + quit(1) + return + var solution = r[0] + + var test_suite = load(args.test_suite_script_path).new() + + Runner.new(test_suite, solution, stderr, result_writer).run(args.run_all) + quit() diff --git a/exercises/practice/all-your-base/project.godot b/exercises/practice/all-your-base/project.godot new file mode 100644 index 0000000..6cff296 --- /dev/null +++ b/exercises/practice/all-your-base/project.godot @@ -0,0 +1,5 @@ +config_version=5 + +[application] +config/name="Exercism - All Your Base" +config/features=PackedStringArray("4.7") diff --git a/exercises/practice/all-your-base/run_tests b/exercises/practice/all-your-base/run_tests new file mode 100755 index 0000000..ed18a90 --- /dev/null +++ b/exercises/practice/all-your-base/run_tests @@ -0,0 +1,6 @@ +#!/usr/bin/env bash + +slug=${PWD##*/} +[[ -f "${slug//-/_}.gd" ]] || die "Error! solution file is missing" +[[ -f "${slug//-/_}_test.gd" ]] || die "Error! test file is missing" +exec godot --headless --script ./lib/test_runner.gd -- "${slug}" "${PWD}"