grid.py

#######################################################
# Everything to do with reading the grid
# You can build this using binary grid files or NetCDF output files created by xmitgcm which include all the necessary grid variables.
#
# For binary, put the *.data and *.meta files for the following variables into one directory: Depth, DRC, DRF, DXG, DYG, hFacC, hFacS, hFacW, RAC, RC, RF, XC, XG, YC, YG.
#
# IMPORTANT NOTE: The calculation of ice shelf draft and bathymetry may not be accurate in partial cells which include both ice and seafloor (i.e. the wet portion of the cell is in the middle, not at the top or bottom). However, this should never happen in domains created using make_domain.py, as the digging ensures all water columns are at least two (possibly partial) cells deep.
#######################################################

import numpy as np
import sys
import os

from .file_io import read_netcdf, find_cmip6_files
from .utils import fix_lon_range, real_dir, split_longitude, xy_to_xyz, z_to_xyz, bdry_from_hfac, select_bottom, ice_shelf_front_points, wrap_periodic, mask_2d_to_3d, connected_mask, polar_stereo_inv, remove_disconnected, closest_point
from .constants import region_bounds, region_split, region_bathy_bounds, region_depth_bounds, sose_res, rEarth, deg2rad, region_point0


# Grid object containing lots of grid variables:
# nx, ny, nz: dimensions of grid
# lon_2d: longitude at cell centres (degrees, XY)
# lat_2d: latitude at cell centres (degrees, XY)
# lon_corners_2d: longitude at cell corners (degrees, XY)
# lat_corners_2d: latitude at cell corners (degrees, XY)
# lon_1d, lat_1d, lon_corners_1d, lat_corners_1d: 1D versions of the corresponding 2D arrays, note this assumes a polar spherical grid! (X or Y)
# dx_s: width of southern cell edge (m, XY)
# dy_w: height of western cell edge (m, XY)
# dA: area of cell (m^2, XY)
# z: depth axis at cell centres (negative, m, Z)
# z_edges: depth axis at cell interfaces; dimension 1 larger than z (negative, m, Z)
# dz: thickness of cell (m, Z)
# dz_t: thickness between cell centres (m, Z)
# hfac: partial cell fraction (XYZ)
# hfac_w: partial cell fraction at u-points (XYZ)
# hfac_s: partial cell fraction at v-points (XYZ)
# dV: volume of cell considering partial cells (m^3, XYZ)
# bathy: bathymetry (negative, m, XY)
# draft: ice shelf draft (negative, m, XY)
# land_mask, land_mask_u, land_mask_v: boolean land masks on the tracer, u, and v grids (XY). True means it is masked.
# ice_mask, ice_mask_u, ice_mask_v: boolean ice shelf masks on the tracer, u, and v grids (XY)
class Grid:

    # Initialisation arguments:
    # file_path: path to NetCDF grid file OR directory containing binary files
    # x_is_lon: indicates that X indicates longitude. If True, max_lon will be enforced.
    # max_lon: will adjust longitude to be in the range (max_lon-360, max_lon). By default the code will work out whether (0, 360) or (-180, 180) is more appropriate.
    def __init__ (self, path, x_is_lon=True, max_lon=None):

        if path.endswith('.nc'):
            use_netcdf=True
        elif os.path.isdir(path):
            use_netcdf=False
            path = real_dir(path)
            from MITgcmutils import rdmds
        else:
            print(('Error (Grid): ' + path + ' is neither a NetCDF file nor a directory'))
            sys.exit()
            
        # Read variables
        # Note that some variables are capitalised differently in NetCDF versus binary, so can't make this more efficient...
        if use_netcdf:
            self.lon_2d = read_netcdf(path, 'XC')
            self.lat_2d = read_netcdf(path, 'YC')
            self.lon_corners_2d = read_netcdf(path, 'XG')
            self.lat_corners_2d = read_netcdf(path, 'YG')
            self.dx_s = read_netcdf(path, 'dxG')
            self.dy_w = read_netcdf(path, 'dyG')
            self.dA = read_netcdf(path, 'rA').data
            self.z = read_netcdf(path, 'Z')
            self.z_edges = read_netcdf(path, 'Zp1')
            self.dz = read_netcdf(path, 'drF')
            self.dz_t = read_netcdf(path, 'drC')
            self.hfac = read_netcdf(path, 'hFacC')
            self.hfac_w = read_netcdf(path, 'hFacW')
            self.hfac_s = read_netcdf(path, 'hFacS')
        else:
            self.lon_2d = rdmds(path+'XC')
            self.lat_2d = rdmds(path+'YC')
            self.lon_corners_2d = rdmds(path+'XG')
            self.lat_corners_2d = rdmds(path+'YG')
            self.dx_s = rdmds(path+'DXG')
            self.dy_w = rdmds(path+'DYG')
            self.dA = rdmds(path+'RAC')
            # Remove singleton dimensions from 1D depth variables
            self.z = rdmds(path+'RC').squeeze()
            self.z_edges = rdmds(path+'RF').squeeze()
            self.dz = rdmds(path+'DRF').squeeze()
            self.dz_t = rdmds(path+'DRC').squeeze()
            self.hfac = rdmds(path+'hFacC')
            self.hfac_w = rdmds(path+'hFacW')
            self.hfac_s = rdmds(path+'hFacS')

        # Make 1D versions of latitude and longitude arrays (only useful for regular lat-lon grids)
        if len(self.lon_2d.shape) == 2:
            self.lon_1d = self.lon_2d[0,:]
            self.lat_1d = self.lat_2d[:,0]
            self.lon_corners_1d = self.lon_corners_2d[0,:]
            self.lat_corners_1d = self.lat_corners_2d[:,0]
        elif len(self.lon_2d.shape) == 1:
            # xmitgcm output has these variables as 1D already. So make 2D ones.
            self.lon_1d = np.copy(self.lon_2d)
            self.lat_1d = np.copy(self.lat_2d)
            self.lon_corners_1d = np.copy(self.lon_corners_2d)
            self.lat_corners_1d = np.copy(self.lat_corners_2d)
            self.lon_2d, self.lat_2d = np.meshgrid(self.lon_1d, self.lat_1d)
            self.lon_corners_2d, self.lat_corners_2d = np.meshgrid(self.lon_corners_1d, self.lat_corners_1d)

        # Decide on longitude range
        if max_lon is None and x_is_lon:            
            # Choose range automatically
            if np.amin(self.lon_1d) < 180 and np.amax(self.lon_1d) > 180:
                # Domain crosses 180E, so use the range (0, 360)
                max_lon = 360
            else:
                # Use the range (-180, 180)
                max_lon = 180
            # Do one array to test
            self.lon_1d = fix_lon_range(self.lon_1d, max_lon=max_lon)
            # Make sure it's strictly increasing now
            if not np.all(np.diff(self.lon_1d)>0):
                print('Error (Grid): Longitude is not strictly increasing either in the range (0, 360) or (-180, 180).')
                sys.exit()
        if max_lon == 360:
            self.split = 0
        elif max_lon == 180:
            self.split = 180
        self.lon_1d = fix_lon_range(self.lon_1d, max_lon=max_lon)
        self.lon_corners_1d = fix_lon_range(self.lon_corners_1d, max_lon=max_lon)
        self.lon_2d = fix_lon_range(self.lon_2d, max_lon=max_lon)
        self.lon_corners_2d = fix_lon_range(self.lon_corners_2d, max_lon=max_lon)

        # Save dimensions
        self.nx = self.lon_1d.size
        self.ny = self.lat_1d.size
        self.nz = self.z.size

        # Calculate volume
        self.dV = xy_to_xyz(self.dA, [self.nx, self.ny, self.nz])*z_to_xyz(self.dz, [self.nx, self.ny, self.nz])*self.hfac

        # Calculate bathymetry and ice shelf draft
        self.bathy = bdry_from_hfac('bathy', self.hfac, self.z_edges)
        self.draft = bdry_from_hfac('draft', self.hfac, self.z_edges)

        # Create masks on the t, u, and v grids
        # Land masks
        self.land_mask = self.build_land_mask(self.hfac)
        self.land_mask_u = self.build_land_mask(self.hfac_w)
        self.land_mask_v = self.build_land_mask(self.hfac_s)
        # Ice shelf masks
        self.ice_mask = self.build_ice_mask(self.hfac)
        self.ice_mask_u = self.build_ice_mask(self.hfac_w)
        self.ice_mask_v = self.build_ice_mask(self.hfac_s)

        
    # Given a 3D hfac array on any grid, create the land mask.
    def build_land_mask (self, hfac):

        return np.sum(hfac, axis=0)==0


    # Given a 3D hfac array on any grid, create the ice shelf mask.
    def build_ice_mask (self, hfac):

        return (np.sum(hfac, axis=0)!=0)*(hfac[0,:]<1)
    
        
    # Return the longitude and latitude arrays for the given grid type.
    # 't' (default), 'u', 'v', 'psi', and 'w' are all supported.
    # Default returns the 2D meshed arrays; can set dim=1 to get 1D axes.
    def get_lon_lat (self, gtype='t', dim=2):

        if dim == 1:
            lon = self.lon_1d
            lon_corners = self.lon_corners_1d
            lat = self.lat_1d
            lat_corners = self.lat_corners_1d
        elif dim == 2:
            lon = self.lon_2d
            lon_corners = self.lon_corners_2d
            lat = self.lat_2d
            lat_corners = self.lat_corners_2d
        else:
            print('Error (get_lon_lat): dim must be 1 or 2')
            sys.exit()

        if gtype in ['t', 'w']:
            return lon, lat
        elif gtype == 'u':
            return lon_corners, lat
        elif gtype == 'v':
            return lon, lat_corners
        elif gtype == 'psi':
            return lon_corners, lat_corners
        else:
            print(('Error (get_lon_lat): invalid gtype ' + gtype))
            sys.exit()


    # Return the hfac array for the given grid type.
    # 'psi' and 'w' have no hfac arrays so they are not supported
    def get_hfac (self, gtype='t'):

        if gtype == 't':
            return self.hfac
        elif gtype == 'u':
            return self.hfac_w
        elif gtype == 'v':
            return self.hfac_s
        else:
            print(('Error (get_hfac): no hfac exists for the ' + gtype + ' grid'))
            sys.exit()


    # Return the land mask for the given grid type.
    def get_land_mask (self, gtype='t'):

        if gtype == 't':
            return self.land_mask
        elif gtype == 'u':
            return self.land_mask_u
        elif gtype == 'v':
            return self.land_mask_v
        else:
            print(('Error (get_land_mask): no mask exists for the ' + gtype + ' grid'))
            sys.exit()


    # Restrict a mask to a given region.
    def restrict_mask (self, mask, region_name, gtype='t'):

        lon, lat = self.get_lon_lat(gtype=gtype)
        mask_new = np.zeros(mask.shape, dtype='bool')
        if region_name.endswith('_cavity'):
            region_name = region_name[:region_name.index('_cavity')]
        # Find the bounds on the region (possibly split into 2).
        if region_name in region_split:
            names = [region_name+'1', region_name+'2']
        else:
            names = [region_name]
        for name in names:
            [xmin, xmax, ymin, ymax] = region_bounds[name]
            if self.split == 0:
                # Need to adjust the longitude bounds so in range 0-360
                if xmin < 0:
                    xmin += 360
                if xmax < 0:
                    xmax += 360
            # Select the mask points within these bounds
            index = mask*(lon >= xmin)*(lon <= xmax)*(lat >= ymin)*(lat <= ymax)
            mask_new[index] = True
        return mask_new

            
    # Return the ice shelf mask for the given ice shelf and grid type.
    def get_ice_mask (self, shelf='all', gtype='t'):

        # Select grid type
        if gtype == 't':
            ice_mask_all = self.ice_mask
        elif gtype == 'u':
            ice_mask_all = self.ice_mask_u
        elif gtype == 'v':
            ice_mask_all = self.ice_mask_v
        else:
            print(('Error (get_ice_mask): no mask exists for the ' + gtype + ' grid'))
            sys.exit()
        
        # Select ice shelf
        if shelf == 'all':
            return ice_mask_all
        else:
            return self.restrict_mask(ice_mask_all, shelf, gtype=gtype)


    # Build and return an open ocean mask for the given grid type.
    def get_open_ocean_mask (self, gtype='t'):

        # Start with array of all ones
        open_ocean = np.ones([self.ny, self.nx])
        # Set to zero in land and ice shelf regions
        open_ocean[self.get_land_mask(gtype=gtype)] = 0
        open_ocean[self.get_ice_mask(gtype=gtype)] = 0

        return open_ocean.astype(bool)
    
    
    # Build and return a mask for a given region of the ocean. These points must be:
    # 1. within the lat/lon bounds of the given region,
    # 2. within the isobaths defining the region (optional),
    # 3. not ice shelf or land points (unless the region ends with "cavity", in which case only consider ice shelf points)
    # If is_3d=True, will return a 3D mask within the depth bounds of the given region.
    # If point0=(lon0,lat0), will remove any points which are not connected to this point in the mask in 2D.
    # If connected=True, will look up point0 from constants.py.
    def get_region_mask(self, region, gtype='t', is_3d=False, include_iceberg=False, connected=False, point0=None):

        land_mask = self.get_land_mask(gtype=gtype)
        ice_mask = self.get_ice_mask(gtype=gtype)
        lon, lat = self.get_lon_lat(gtype=gtype)
        # Assume bathymetry on the tracer grid.

        # Get bathymetry bounds
        try:
            [deep_bound, shallow_bound] = region_bathy_bounds[region]
        except(KeyError):
            deep_bound = None
            shallow_bound = None
        if deep_bound is None:
            deep_bound = np.amin(self.bathy)
        if shallow_bound is None:
            shallow_bound = np.amax(self.bathy)

        # Restrict based on isobaths, land, and ice shelves
        if region.endswith('cavity'):
            ice_mask = np.invert(ice_mask)
        mask = np.invert(land_mask)*np.invert(ice_mask)*(self.bathy >= deep_bound)*(self.bathy <= shallow_bound)
        # Now restrict based on lat-lon bounds
        mask = self.restrict_mask(mask, region, gtype=gtype)

        if include_iceberg and region=='sws_shelf':
            # Add grounded iceberg A23A to the mask
            [xmin, xmax, ymin, ymax] = region_bounds['a23a']
            index = (self.lon_2d >= xmin)*(self.lon_2d <= xmax)*(self.lat_2d >= ymin)*(self.lat_2d <= ymax)*(self.land_mask)
            mask[index] = True

        if connected:
            if region in region_point0:                
                if point0 is not None:
                    print('Warning: overwriting point0')
                point0 = region_point0[region]
            else:
                if point0 is None:
                    print('Warning: cannot apply connectivity without point0')
        if point0 is not None:
            mask = remove_disconnected(mask, closest_point(self, point0))

        if is_3d:
            # Add a depth dimension and restrict to depth bounds
            try:
                [zmin, zmax] = region_depth_bounds[region]
            except(KeyError):
                zmin = None
                zmax = None
            mask = mask_2d_to_3d(mask, self, zmin=zmin, zmax=zmax)

        return mask

    
    # For the given region, build and return masks of the 4 boundaries:
    # 1. icefront: ice shelf or land
    # 2. openocean: other side of critical isobath denoting shelf
    # 3. upstream: eastern boundary on continental shelf
    # 4. downstream: northern boundary on continental shelf
    # Set the argument bdry to one of these names, or 'all'.
    # Each mask consists of points which are within the given region, but which have at least one neighbour that is outside of the region for the respective reason. The masks do not overlap; #1 takes precendence, followed by #2, etc.
    # This was written specifically for the sws_shelf region but could easily be edited to work for other regions.
    def get_region_bdry_mask (self, region, bdry, gtype='t', ignore_iceberg=True):

        from .interpolation import neighbours

        if region != 'sws_shelf':
            print('Error (get_region_bdry_mask): code only works for sws_shelf case, you will have to edit and test it')
            sys.exit()

        land_mask = self.get_land_mask(gtype=gtype)
        ice_mask = self.get_ice_mask(gtype=gtype)
        lon, lat = self.get_lon_lat(gtype=gtype)

        # Get threshold parameters for boundaries
        bathy_deep = region_bathy_bounds[region][0]
        lon_east = region_bounds[region][1]
        lat_north = region_bounds[region][3]        

        # Make 1-0 masks for cells that violate these conditions in particular ways
        ice_or_land = (ice_mask + land_mask).astype(float)
        too_deep = (self.bathy < bathy_deep).astype(float)  
        too_east = (lon >= lon_east).astype(float)
        too_north = (lat >= lat_north).astype(float)              

        # Build the region mask itself
        mask = self.get_region_mask(region, gtype=gtype)
        if ignore_iceberg:
            # Remove grounded iceberg A23A from the mask
            [xmin, xmax, ymin, ymax] = region_bounds['a23a']
            index = (lon >= xmin)*(lon <= xmax)*(lat >= ymin)*(lat <= ymax)
            mask[index] = False

        # Inner function to select points at each boundary
        def get_boundary (condition_mask):
            num_neighbours_violate = neighbours(condition_mask, missing_val=0)[-1]
            return mask*(num_neighbours_violate > 0)

        # Create each mask, making sure there's no overlap
        icefront_mask = get_boundary(ice_or_land)
        openocean_mask = get_boundary(too_deep)*np.invert(icefront_mask)
        upstream_mask = get_boundary(too_east)*np.invert(icefront_mask)*np.invert(openocean_mask)
        downstream_mask = get_boundary(too_north)*np.invert(icefront_mask)*np.invert(openocean_mask)*np.invert(upstream_mask)

        if bdry == 'icefront':
            return icefront_mask
        elif bdry == 'openocean':
            return openocean_mask
        elif bdry == 'upstream':
            return upstream_mask
        elif bdry == 'downstream':
            return downstream_mask
        elif bdry == 'all':
            return icefront_mask, openocean_mask, upstream_mask, downstream_mask
        else:
            print(('Error (get_region_bdry_mask): invalid bdry ' + bdry))
            sys.exit()


    # Build and return a mask for the ice shelf front points of the given ice shelf.
    def get_icefront_mask (self, shelf='all', gtype='t', is_3d=False, side='ice'):

        if shelf == 'filchner':
            shelf_use = 'fris'
            [xmin, xmax, ymin, ymax] = region_bounds['filchner_front']
        elif shelf == 'ronne_depression':
            shelf_use = 'fris'
            [xmin, xmax, ymin, ymax] = region_bounds[shelf]
        else:
            shelf_use = shelf
            [xmin, xmax, ymin, ymax] = [None, None, None, None]
        ice_mask = self.get_ice_mask(shelf=shelf_use, gtype=gtype)
        mask = ice_shelf_front_points(self, ice_mask=ice_mask, xmin=xmin, xmax=xmax, ymin=ymin, ymax=ymax, side=side)
        if is_3d:
            mask = mask_2d_to_3d(mask, self)
        return mask

    
    # Build and return a mask for coastal points: open-ocean points with at least one neighbour that is land or ice shelf.
    def get_coast_mask (self, gtype='t', ignore_iceberg=True):
        from .interpolation import neighbours
        open_ocean = self.get_open_ocean_mask(gtype=gtype)
        land_ice = 1 - open_ocean
        num_coast_neighbours = neighbours(land_ice, missing_val=0)[-1]
        coast_mask = (open_ocean*(num_coast_neighbours > 0)).astype(bool)
        if ignore_iceberg:
            # Grounded iceberg A23A should not be considered the coast
            lon, lat = self.get_lon_lat(gtype=gtype)
            [xmin, xmax, ymin, ymax] = region_bounds['a23a']
            index = (lon >= xmin)*(lon <= xmax)*(lat >= ymin)*(lat <= ymax)
            coast_mask[index] = False
            # Similarly for little island in PAS grid
            [xmin, xmax, ymin, ymax] = [-95, -85, -70, -68]
            index = (lon >= xmin)*(lon <= xmax)*(lat >= ymin)*(lat <= ymax)
            coast_mask[index] = False
        return coast_mask


    # Build and return a mask for grounding line points: ice shelf points with at least one neighbour which is grounded ice. The default is to only consider grounding lines connected to the "proper" grounded ice sheet (defined as the central southern point of the domain), and to exclude the grounding lines of pinning points etc, but you can override this by setting pinning_points=True.
    def get_grounding_line_mask (self, pinning_points=False, return_grounded_mask=False):

        from .interpolation import neighbours
        if pinning_points:
            # Consider the grounding lines of pinning points too
            grounded_mask = self.land_mask
        else:
            # Only consider "proper" grounding lines of the grounded ice sheet
            ice_sheet_point0 = [0, round(self.nx/2)]
            grounded_mask = connected_mask(ice_sheet_point0, self.land_mask)
        num_grounded_neighbours = neighbours(grounded_mask, missing_val=0)[-1]
        gl_mask = (self.ice_mask*(num_grounded_neighbours > 0)).astype(bool)
        if return_grounded_mask:
            return gl_mask, grounded_mask
        else:
            return gl_mask
        


# Interface to Grid for situations such as read_plot_latlon where there are three possibilities:
# (1) the Grid object is precomputed and saved in variable "grid"; nothing to do
# (2) the Grid object is not precomputed, but file_path (where the model output is being read from in the master function) contains the grid variables; build the Grid from this file
# (3) the Grid object is not precomputed and file_path does not contain the grid variables; "grid" instead contains the path to either (a) the binary grid directory or (b) a NetCDF file containing the grid variables; build the grid from this path
def choose_grid (grid, file_path):

    if grid is None:
        # Build the grid from file_path (option 2 above)
        grid = Grid(file_path)
    else:
        if not isinstance(grid, Grid):
            # Create a Grid object from the given path (option 3 above)
            grid = Grid(grid)
        # Otherwise, the Grid object was precomputed (option 1 above)
    return grid


# Interface to Grid for situations such as sose_ics, where max_lon should be set so there is no jump in longitude in the middle of the model domain. Create the Grid object from grid_path and make sure the user has chosen the correct value for split (180 or 0).
def grid_check_split (grid_path, split):

    if split == 180:
        grid = Grid(grid_path, max_lon=180)
        if grid.lon_1d[0] > grid.lon_1d[-1]:
            print('Error (grid_check_split): Looks like your domain crosses 180E. Run this again with split=0.')
            sys.exit()
    elif split == 0:
        grid = Grid(grid_path, max_lon=360)
        if grid.lon_1d[0] > grid.lon_1d[-1]:
            print('Error (grid_check_split): Looks like your domain crosses 0E. Run this again with split=180.')
            sys.exit()
    else:
        print('Error (grid_check_split): split must be 180 or 0')
        sys.exit()
    return grid


# Special class for the SOSE grid, which is read from a few binary files. It inherits many functions from Grid.

# To speed up interpolation, trim and/or extend the SOSE grid to agree with the bounds of model_grid (Grid object for the model which you'll be interpolating SOSE data to).
# Depending on the longitude range within the model grid, it might also be necessary to rearrange the SOSE grid so it splits at 180E=180W (split=180, implying longitude ranges from -180 to 180 and max_lon=180 when creating model_grid) instead of its native split at 0E (split=0, implying longitude ranges from 0 to 360 and max_lon=360 when creating model_grid).
# The rule of thumb is, if your model grid includes 0E, split at 180E, and vice versa. A circumpolar model should be fine either way as long as it doesn't have any points in the SOSE periodic boundary gap (in which case you'll have to write a patch). 
# MOST IMPORTANTLY, if you are reading a SOSE binary file, don't use rdmds or read_netcdf. Use the class function read_field (defined below) which will repeat the trimming/extending/splitting/rearranging correctly.

# If you don't want to do any trimming or extending, just set model_grid=None.
class SOSEGrid(Grid):

    def __init__ (self, path, model_grid=None, split=0):

        self.split = split

        if path.endswith('.nc'):
            use_netcdf=True
        elif os.path.isdir(path):
            use_netcdf=False
            path = real_dir(path)
            from MITgcmutils import rdmds
        else:
            print(('Error (SOSEGrid): ' + path + ' is neither a NetCDF file nor a directory'))
            sys.exit()

        self.trim_extend = True
        if model_grid is None:
            self.trim_extend = False

        if self.trim_extend:
            # Error checking for which longitude range we're in
            if split == 180:
                max_lon = 180
                if np.amax(model_grid.lon_2d) > max_lon:
                    print('Error (SOSEGrid): split=180 does not match model grid')
                    sys.exit()
            elif split == 0:
                max_lon = 360
                if np.amin(model_grid.lon_2d) < 0:
                    print('Error (SOSEGrid): split=0 does not match model grid')
                    sys.exit()
            else:
                print('Error (SOSEGrid): split must be 180 or 0')
                sys.exit()
        else:
            max_lon = 360

        # Read variables
        if use_netcdf:
            # Make the 2D grid 1D so it's regular
            self.lon_1d = read_netcdf(path, 'XC')[0,:]
            self.lon_corners_1d = read_netcdf(path, 'XG')[0,:]
            self.lat_1d = read_netcdf(path, 'YC')[:,0]
            self.lat_corners_1d = read_netcdf(path, 'YG')[:,0]
            self.z = read_netcdf(path, 'RC')
            self.z_edges = read_netcdf(path, 'RF')
        else:
            self.lon_1d = rdmds(path+'XC')[0,:]
            self.lon_corners_1d = rdmds(path+'XG')[0,:]
            self.lat_1d = rdmds(path+'YC')[:,0]
            self.lat_corners_1d = rdmds(path+'YG')[:,0]
            self.z = rdmds(path+'RC').squeeze()
            self.z_edges = rdmds(path+'RF').squeeze()

        # Fix longitude range
        self.lon_1d = fix_lon_range(self.lon_1d, max_lon=max_lon)
        self.lon_corners_1d = fix_lon_range(self.lon_corners_1d, max_lon=max_lon)
        if split == 180:
            # Split the domain at 180E=180W and rearrange the two halves so longitude is strictly ascending
            self.i_split = np.nonzero(self.lon_1d < 0)[0][0]
        else:
            # Set i_split to 0 which won't actually do anything
            self.i_split = 0
        self.lon_1d = split_longitude(self.lon_1d, self.i_split)
        self.lon_corners_1d = split_longitude(self.lon_corners_1d, self.i_split)
        if self.lon_corners_1d[0] > 0:
            # The split happened between lon_corners[i_split] and lon[i_split].
            # Take mod 360 on this index of lon_corners to make sure it's strictly increasing.
            self.lon_corners_1d[0] -= 360
        # Make sure the longitude axes are strictly increasing after the splitting
        if not np.all(np.diff(self.lon_1d)>0) or not np.all(np.diff(self.lon_corners_1d)>0):
            print('Error (SOSEGrid): longitude is not strictly increasing')
            sys.exit()
            
        # Save original dimensions
        sose_nx = self.lon_1d.size
        sose_ny = self.lat_1d.size
        sose_nz = self.z.size

        if self.trim_extend:
        
            # Trim and/or extend the axes
            # Notes about this:
            # Longitude can only be trimmed as SOSE considers all longitudes (someone doing a high-resolution circumpolar model with points in the gap might need to write a patch to wrap the SOSE grid around)
            # Latitude can be trimmed in both directions, or extended to the south (not extended to the north - if you need to do this, SOSE is not the right product for you!)
            # Depth can be extended by one level in both directions, and the deeper bound can also be trimmed
            # The indices i, j, and k will be kept track of with 4 variables each. For example, with longitude:
            # i0_before = first index we care about
            #           = how many cells to trim at beginning
            # i0_after = i0_before's position in the new grid
            #          = how many cells to extend at beginning
            # i1_before = first index we don't care about
            #           sose_nx - i1_before = how many cells to trim at end
            # i1_after = i1_before's position in the new grid
            #          = i1_before - i0_before + i0_after
            # nx = length of new grid
            #      nx - i1_after = how many cells to extend at end

            # Find bounds on model grid
            xmin = np.amin(model_grid.lon_corners_2d)
            xmax = np.amax(model_grid.lon_2d)
            ymin = np.amin(model_grid.lat_corners_2d)
            ymax = np.amax(model_grid.lat_2d)
            z_shallow = model_grid.z[0]
            z_deep = model_grid.z[-1]

            # Western bound (use longitude at cell centres to make sure all grid types clear the bound)
            if xmin == self.lon_1d[0]:
                # Nothing to do
                self.i0_before = 0            
            elif xmin > self.lon_1d[0]:
                # Trim
                self.i0_before = np.nonzero(self.lon_1d > xmin)[0][0] - 1
            else:
                print('Error (SOSEGrid): not allowed to extend westward')
                sys.exit()
            self.i0_after = 0

            # Eastern bound (use longitude at cell corners, i.e. western edge)
            if xmax == self.lon_corners_1d[-1]:
                # Nothing to do
                self.i1_before = sose_nx
            elif xmax < self.lon_corners_1d[-1]:
                # Trim
                self.i1_before = np.nonzero(self.lon_corners_1d > xmax)[0][0] + 1
            else:
                print('Error (SOSEGrid): not allowed to extend eastward')
                sys.exit()
            self.i1_after = self.i1_before - self.i0_before + self.i0_after
            self.nx = self.i1_after

            # Southern bound (use latitude at cell centres)
            if ymin == self.lat_1d[0]:
                # Nothing to do
                self.j0_before = 0
                self.j0_after = 0
            elif ymin > self.lat_1d[0]:
                # Trim
                self.j0_before = np.nonzero(self.lat_1d > ymin)[0][0] - 1
                self.j0_after = 0
            elif ymin < self.lat_1d[0]:
                # Extend
                self.j0_after = int(np.ceil((self.lat_1d[0]-ymin)/sose_res))
                self.j0_before = 0

            # Northern bound (use latitude at cell corners, i.e. southern edge)
            if ymax == self.lat_corners_1d[-1]:
                # Nothing to do
                self.j1_before = sose_ny
            elif ymax < self.lat_corners_1d[-1]:
                # Trim
                self.j1_before = np.nonzero(self.lat_corners_1d > ymax)[0][0] + 1
            else:
                print('Error (SOSEGrid): not allowed to extend northward')
                sys.exit()
            self.j1_after = self.j1_before - self.j0_before + self.j0_after
            self.ny = self.j1_after

            # Depth
            self.k0_before = 0
            if z_shallow <= self.z[0]:
                # Nothing to do
                self.k0_after = 0
            else:
                # Extend
                self.k0_after = 1
            if z_deep > self.z[-1]:
                # Trim
                self.k1_before = np.nonzero(self.z < z_deep)[0][0] + 1
            else:
                # Either extend or do nothing
                self.k1_before = sose_nz
            self.k1_after = self.k1_before + self.k0_after
            if z_deep < self.z[-1]:
                # Extend
                self.nz = self.k1_after + 1
            else:
                self.nz = self.k1_after

            # Now we have the indices we need, so trim/extend the axes as needed
            # Longitude: can only trim
            self.lon_1d = self.lon_1d[self.i0_before:self.i1_before]
            self.lon_corners_1d = self.lon_corners_1d[self.i0_before:self.i1_before]
            # Latitude: can extend on south side, trim on both sides
            lat_extend = np.flipud(-1*(np.arange(self.j0_after)+1)*sose_res + self.lat_1d[self.j0_before])
            lat_trim = self.lat_1d[self.j0_before:self.j1_before]        
            self.lat_1d = np.concatenate((lat_extend, lat_trim))
            lat_corners_extend = np.flipud(-1*(np.arange(self.j0_after)+1)*sose_res + self.lat_corners_1d[self.j0_before])
            lat_corners_trim = self.lat_corners_1d[self.j0_before:self.j1_before]        
            self.lat_corners_1d = np.concatenate((lat_corners_extend, lat_corners_trim))
            # Depth: can extend on both sides (depth 0 at top and extrapolated at bottom to clear the deepest model depth), trim on deep side
            z_above = 0*np.ones([self.k0_after])  # Will either be [0] or empty
            z_middle = self.z[self.k0_before:self.k1_before]
            z_edges_middle = self.z_edges[self.k0_before:self.k1_before+1]
            z_below = (2*model_grid.z[-1] - model_grid.z[-2])*np.ones([self.nz-self.k1_after])   # Will either be [something deeper than z_deep] or empty
            self.z = np.concatenate((z_above, z_middle, z_below))
            self.z_edges = np.concatenate((z_above, z_edges_middle, z_below))

            # Make sure we cleared those bounds
            if self.lon_corners_1d[0] > xmin:
                print('Error (SOSEGrid): western bound not cleared')
                sys.exit()
            if self.lon_corners_1d[-1] < xmax:
                print('Error (SOSEGrid): eastern bound not cleared')
                sys.exit()
            if self.lat_corners_1d[0] > ymin:
                print('Error (SOSEGrid): southern bound not cleared')
                sys.exit()
            if self.lat_corners_1d[-1] < ymax:
                print('Error (SOSEGrid): northern bound not cleared')
                sys.exit()
            if self.z[0] < z_shallow:
                print('Error (SOSEGrid): shallow bound not cleared')
                sys.exit()
            if self.z[-1] > z_deep:
                print('Error (SOSEGrid): deep bound not cleared')
                sys.exit()

        else:

            # Nothing fancy to do
            self.nx = sose_nx
            self.ny = sose_ny
            self.nz = sose_nz

        # Now read the rest of the variables we need, splitting/trimming/extending them if needed
        if use_netcdf:
            self.hfac = self.read_field(path, 'xyz', var_name='hFacC', fill_value=0)
            self.hfac_w = self.read_field(path, 'xyz', var_name='hFacW', fill_value=0)
            self.hfac_s = self.read_field(path, 'xyz', var_name = 'hFacS', fill_value=0)
            self.dA = self.read_field(path, 'xy', var_name='RAC', fill_value=0)
            self.dz = self.read_field(path, 'z', var_name='DRF', fill_value=0)
        else:
            self.hfac = self.read_field(path+'hFacC', 'xyz', fill_value=0)
            self.hfac_w = self.read_field(path+'hFacW', 'xyz', fill_value=0)
            self.hfac_s = self.read_field(path+'hFacS', 'xyz', fill_value=0)
            self.dA = self.read_field(path+'RAC', 'xy', fill_value=0)
            self.dz = self.read_field(path+'DRF', 'z', fill_value=0)
        # Calculate volume
        self.dV = xy_to_xyz(self.dA, [self.nx, self.ny, self.nz])*z_to_xyz(self.dz, [self.nx, self.ny, self.nz])*self.hfac

        # Mesh lat and lon
        self.lon_2d, self.lat_2d = np.meshgrid(self.lon_1d, self.lat_1d)
        self.lon_corners_2d, self.lat_corners_2d = np.meshgrid(self.lon_corners_1d, self.lat_corners_1d)

        # Calculate bathymetry
        self.bathy = bdry_from_hfac('bathy', self.hfac, self.z_edges)
            
        # Create land masks
        self.land_mask = self.build_land_mask(self.hfac)
        self.land_mask_u = self.build_land_mask(self.hfac_w)
        self.land_mask_v = self.build_land_mask(self.hfac_s)
        # Dummy ice mask with all False
        self.ice_mask = np.zeros(self.land_mask.shape).astype(bool)
    


    # Read a field from an MDS or NetCDF file and split, trim, extend as needed.
    # The field can be time dependent: dimensions must be one of 'z', 'xy', 'xyt', 'xyz', or 'xyzt'.
    # Extended regions will just be filled with fill_value for now. See function discard_and_fill in interpolation.py for how to extrapolate data into these regions.
    def read_field (self, path, dimensions, var_name=None, fill_value=-9999):

        if path.endswith('.nc'):
            if var_name is None:
                print('Error (SOSEGrid.read_field): Must specify var_name for NetCDF files')
                sys.exit()
            data_orig = read_netcdf(path, var_name)
        elif path.endswith('.data') or os.path.isfile(path+'.data'):
            from MITgcmutils import rdmds
            data_orig = rdmds(path.replace('.data', ''))
            if dimensions == 'z':
                data_orig = data_orig.squeeze()
        
        if self.trim_extend:
            if dimensions == 'z':
                # 1D depth field
                data_shape = [self.nz]
            else:
                # Split along longitude
                data_orig = split_longitude(data_orig, self.i_split)
                # Create a new array of the correct dimension (including extended regions)
                data_shape = [self.ny, self.nx]
                if 'z' in dimensions:
                    data_shape = [self.nz] + data_shape        
                if 't' in dimensions:
                    num_time = data_orig.shape[0]
                    data_shape = [num_time] + data_shape
            data = np.zeros(data_shape) + fill_value

            # Trim
            if dimensions == 'z':
                data[self.k0_after:self.k1_after] = data_orig[self.k0_before:self.k1_before]
            else:
                if 'z' in dimensions:
                    data[..., self.k0_after:self.k1_after, self.j0_after:self.j1_after, self.i0_after:self.i1_after] = data_orig[..., self.k0_before:self.k1_before, self.j0_before:self.j1_before, self.i0_before:self.i1_before]
                else:
                    data[..., self.j0_after:self.j1_after, self.i0_after:self.i1_after] = data_orig[..., self.j0_before:self.j1_before, self.i0_before:self.i1_before]
        else:
            data = data_orig

        return data



# WOAGrid object containing basic grid variables
class WOAGrid(Grid):

    def __init__ (self, woa_dir, split=180):

        if split != 180:
            print("Error (WOA_grid): Haven't coded for values of split other than 180.")
            sys.exit()
        self.split = split
        file_path = woa_dir + 'woa18_decav_t00_04.nc'
        file_path_mon = woa_dir + 'woa18_decav_t01_04.nc'
        self.lon_1d = read_netcdf(file_path, 'lon')
        self.lat_1d = read_netcdf(file_path, 'lat')        
        self.z = -1*read_netcdf(file_path, 'depth')
        self.z_mon = -1*read_netcdf(file_path_mon, 'depth')
        self.nx = self.lon_1d.size
        self.ny = self.lat_1d.size
        self.nz = self.z.size
        self.nz_mon = self.z_mon.size
        self.lon_2d, self.lat_2d = np.meshgrid(self.lon_1d, self.lat_1d)
        # Assume constant resolution - in practice this is 0.25
        dlon = self.lon_1d[1] - self.lon_1d[0]
        dlat = self.lat_1d[1] - self.lat_1d[0]
        dx = rEarth*np.cos(self.lat_2d*deg2rad)*dlon*deg2rad
        dy = rEarth*dlat*deg2rad
        self.dA = dx*dy
        # Find the bathymetry
        z_3d = z_to_xyz(self.z, self)
        # Get mask from either temperature or salinity
        try:
            data = read_netcdf(file_path, 't_an')
        except(KeyError):
            try:
                data = read_netcdf(file_path, 's_an')
            except(KeyError):
                print('Error (WOAGrid): this is neither a temperature nor a salinity file. Need to code the mask reading for another variable.')
                sys.exit()
        self.mask = data.mask
        z_masked = np.ma.masked_where(self.mask, z_3d)
        self.bathy = select_bottom(z_masked, return_masked=False)
        # Build land mask
        self.land_mask = np.amin(self.mask, axis=0)
        self.ice_mask = np.zeros(self.land_mask.shape).astype(bool)

        
    def get_lon_lat (self, gtype='t', dim=2):
        if gtype != 't':
            print("Error (get_lon_lat): must have gtype='t' for WOAGrid")
            sys.exit()
        if dim == 1:
            return self.lon_1d, self.lat_1d
        elif dim == 2:
            return self.lon_2d, self.lat_2d
    

# CMIPGrid object containing basic grid variables for a CMIP6 ocean grid.
class CMIPGrid:

    def __init__ (self, model_path, expt, ensemble_member, max_lon=180):
        # Get path to one file on the tracer grid
        cmip_file = find_cmip6_files(model_path, expt, ensemble_member, 'thetao', 'Omon')[0][0]
        self.lon_2d = fix_lon_range(read_netcdf(cmip_file, 'longitude'), max_lon=max_lon)
        self.lat_2d = read_netcdf(cmip_file, 'latitude')
        self.z = -1*read_netcdf(cmip_file, 'lev')
        self.mask = read_netcdf(cmip_file, 'thetao', time_index=0).mask
        # And one on the u-grid
        cmip_file_u = find_cmip6_files(model_path, expt, ensemble_member, 'uo', 'Omon')[0][0]
        self.lon_u_2d = fix_lon_range(read_netcdf(cmip_file_u, 'longitude'), max_lon=max_lon)
        self.lat_u_2d = read_netcdf(cmip_file_u, 'latitude')
        self.mask_u = read_netcdf(cmip_file_u, 'uo', time_index=0).mask
        # And one on the v-grid
        cmip_file_v = find_cmip6_files(model_path, expt, ensemble_member, 'vo', 'Omon')[0][0]
        self.lon_v_2d = fix_lon_range(read_netcdf(cmip_file_v, 'longitude'), max_lon=max_lon)
        self.lat_v_2d = read_netcdf(cmip_file_v, 'latitude')
        self.mask_v = read_netcdf(cmip_file_v, 'vo', time_index=0).mask
        # Save grid dimensions too
        self.nx = self.lon_2d.shape[1]
        self.ny = self.lat_2d.shape[0]
        self.nz = self.z.size
        

    # Return longitude and latitude on the right grid
    def get_lon_lat (self, gtype='t', dim=2):
        if dim != 2:
            print('Error (get_lon_lat): must have dim=2 for CMIP grid')
            sys.exit()
        if gtype == 't':
            return self.lon_2d, self.lat_2d
        elif gtype == 'u':
            return self.lon_u_2d, self.lat_u_2d
        elif gtype == 'v':
            return self.lon_v_2d, self.lat_v_2d


    # Return mask on the right grid, either 3D or surface
    def get_mask (self, gtype='t', surface=False):
        if gtype == 't':
            mask_3d = self.mask
        elif gtype == 'u':
            mask_3d = self.mask_u
        elif gtype == 'v':
            mask_3d = self.mask_v
        if surface:
            return mask_3d[0,:]
        else:
            return mask_3d


# Helper function for ERA5Grid and UKESMGrid to assemble the lat, lon, and dA arrays from the parameters as stored in data.exf.
def build_forcing_grid (lon0, lon_inc, lat0, lat_inc, nlon, nlat):

    lon_1d = np.arange(lon0, lon0+nlon*lon_inc, lon_inc)
    lat_1d = np.arange(lat0, lat0+nlat*lat_inc, lat_inc)
    lon, lat = np.meshgrid(lon_1d, lat_1d)
    dx = rEarth*np.cos(lat*deg2rad)*lon_inc*deg2rad
    dy = rEarth*lat_inc*deg2rad
    dA = dx*dy
    return lon, lat, dA


# General helper function to get the area of each cell from latitude and longitude arrays giving the coordinates of the cell centres.
def dA_from_latlon (lon, lat, periodic=False, return_edges=False):

    # Make sure they're 2D
    if len(lon.shape) == 1 and len(lat.shape) == 1:
        lon, lat = np.meshgrid(lon, lat)
    # Now make the edges
    # Longitude
    if periodic:
        lon_extend = wrap_periodic(lon, is_lon=True)
        lon_edges = 0.5*(lon_extend[:,:-1] + lon_extend[:,1:])
    else:
        lon_edges_mid = 0.5*(lon[:,:-1] + lon[:,1:])
        # Extrapolate the longitude boundaries
        lon_edges_w = 2*lon_edges_mid[:,0] - lon_edges_mid[:,1]
        lon_edges_e = 2*lon_edges_mid[:,-1] - lon_edges_mid[:,-2]
        lon_edges = np.concatenate((lon_edges_w[:,None], lon_edges_mid, lon_edges_e[:,None]), axis=1)
    dlon = lon_edges[:,1:] - lon_edges[:,:-1] 
    # Latitude
    lat_edges_mid = 0.5*(lat[:-1,:] + lat[1:,:])
    lat_edges_s = 2*lat_edges_mid[0,:] - lat_edges_mid[1,:]
    lat_edges_n = 2*lat_edges_mid[-1,:] - lat_edges_mid[-2,:]
    lat_edges = np.concatenate((np.expand_dims(lat_edges_s,0), lat_edges_mid, np.expand_dims(lat_edges_n,0)), axis=0)
    dlat = lat_edges[1:,:] - lat_edges[:-1,:]
    # Now convert to Cartesian
    dx = rEarth*np.cos(lat*deg2rad)*dlon*deg2rad
    dy = rEarth*dlat*deg2rad
    dA = dx*dy
    if return_edges:
        return dA, lon_edges, lat_edges
    else:
        return dA


# ERA5Grid object containing basic surface grid variables and calendar variables for ERA5, processed as in forcing.py (everywhere south of 30S, 6-hourly)
class ERA5Grid:

    def __init__ (self, start_year=1979):

        lon0 = 0
        lon_inc = 0.25
        lat0 = -90
        lat_inc = 0.25
        nlon = 1440
        nlat = 241
        self.max_lon = 360
        self.lon, self.lat, self.dA = build_forcing_grid(lon0, lon_inc, lat0, lat_inc, nlon, nlat)
        self.nx = nlon
        self.ny = nlat
        self.start_year = start_year
        self.period = 21600.
        self.calendar = 'standard'

        
    def get_lon_lat (self, gtype='t', dim=2):
        if gtype != 't':
            print('Error (get_lon_lat): there is only the t-grid.')
            sys.exit()
        if dim == 1:
            return self.lon[0,:], self.lat[:,0]
        elif dim == 2:
            return self.lon, self.lat
        else:
            print(('Error (get_lon_lat): invalid dim ' + str(dim)))
            sys.exit()


# Similarly, UKESMGrid object. Contains full globe and daily forcing with 30-day months.
class UKESMGrid:

    def __init__ (self, start_year=2680):

        lon0 = 0.9375
        lon0_u = 0.
        lon_inc = 1.875
        lat0 = -89.375
        lat0_v = -90
        lat_inc = 1.25
        nlon = 192
        nlat = 144
        nlat_v = 145
        self.max_lon = 360
        self.lon, self.lat, self.dA = build_forcing_grid(lon0, lon_inc, lat0, lat_inc, nlon, nlat)
        self.lon_u, self.lat_u = build_forcing_grid(lon0_u, lon_inc, lat0, lat_inc, nlon, nlat)[:2]
        self.lon_v, self.lat_v = build_forcing_grid(lon0, lon_inc, lat0_v, lat_inc, nlon, nlat_v)[:2]
        self.nx = nlon
        self.ny = nlat
        self.ny_v = nlat_v
        self.start_year = start_year
        self.period = 86400.
        self.calendar = '360_day'

        
    def get_lon_lat (self, gtype='t', dim=2):
        
        if gtype == 't':
            lon = self.lon
            lat = self.lat
        elif gtype == 'u':
            lon = self.lon_u
            lat = self.lat_u
        elif gtype == 'v':
            lon = self.lon_v
            lat = self.lat_v
        else:
            print(('Error (get_lon_lat): invalid gtype ' + gtype))
            sys.exit()
            
        if dim == 1:
            return lon[0,:], lat[:,0]
        elif dim == 2:
            return lon, lat
        else:
            print(('Error (get_lon_lat): invalid dim ' + str(dim)))
            sys.exit()


# Similarly for CAM (CESM atmosphere) but more lightweight
class CAMGrid:

    def __init__ (self):

        lon0 = 0.
        lon_inc = 1.25
        lat0 = -90.
        nlon = 288
        nlat = 192
        lat_inc = 180./(nlat-1)
        self.max_lon = 360
        self.lon, self.lat, self.dA = build_forcing_grid(lon0, lon_inc, lat0, lat_inc, nlon, nlat)
        self.nx = nlon
        self.ny = nlat

        
    def get_lon_lat (self, dim=2, gtype='t'):

        if gtype != 't':
            print(('Error (get_lon_lat): invalid gtype ' + gtype))
            sys.exit()        
        if dim == 1:
            return self.lon[0,:], self.lat[:,0]
        elif dim == 2:
            return self.lon, self.lat
        else:
            print(('Error (get_lon_lat): invalid dim ' + str(dim)))
            sys.exit()
        

# Read and process the grid from Pierre's observation climatology file. Pass an open Matlab file handle.
def pierre_obs_grid (f, xy_dim=2, z_dim=1, dA_dim=2):

    lon = np.squeeze(f['lonvec'])
    lat = np.squeeze(f['latvec'])
    depth = np.squeeze(f['depthvec'])

    nx = lon.size
    ny = lat.size
    nz = depth.size
    shape = [ny, nx, nz]

    # Calculate differentials
    dA = np.transpose(dA_from_latlon(lon, lat))
    z_edges = np.concatenate((np.array([0]), 0.5*(depth[:-1]+depth[1:]), np.array([2*depth[-1]-depth[-2]])))
    dz = z_edges[:-1] - z_edges[1:]
    dV = xy_to_xyz(dA, shape)*z_to_xyz(dz, shape)

    if xy_dim > 1:
        lat, lon = np.meshgrid(lat, lon)
    if xy_dim == 3:
        lon = xy_to_xyz(lon, shape)
        lat = xy_to_xyz(lat, shape)
    if dA_dim == 3:
        dA = xy_to_xyz(dA, shape)
    if z_dim == 3:
        depth = z_to_xyz(depth, shape)

    return lon, lat, depth, dA, dV


# Dummy class for a vertical grid to use NCfile with
class ZGrid:

    def __init__ (self, z):

        self.z = z
        self.nz = z.size


# Helper function to build the POP grid, given any LENS ocean file.
def read_pop_grid (file_path, return_ugrid=False):
    
    lon = fix_lon_range(read_netcdf(file_path, 'TLONG'))
    lat = read_netcdf(file_path, 'TLAT')
    if return_ugrid:
        ulon = fix_lon_range(read_netcdf(file_path, 'ULONG'))
        ulat = read_netcdf(file_path, 'ULAT')
    z = -1e-2*read_netcdf(file_path, 'z_t')
    nz = z.size
    ny = lat.shape[0]
    nx = lon.shape[1]
    if return_ugrid:
        return lon, lat, ulon, ulat, z, nx, ny, nz
    else:
        return lon, lat, z, nx, ny, nz


# Similarly for CICE
def read_cice_grid (file_path, return_ugrid=False, return_dA=False):

    lon = fix_lon_range(read_netcdf(file_path, 'TLON'))
    lat = read_netcdf(file_path, 'TLAT')
    if return_ugrid:
        ulon = fix_lon_range(read_netcdf(file_path, 'ULON'))
        ulat = read_netcdf(file_path, 'ULAT')
    ny = lat.shape[0]
    nx = lon.shape[1]
    if return_dA:
        dA = read_netcdf(file_path, 'tarea')
    if return_ugrid:
        if return_dA:
            return lon, lat, ulon, ulat, nx, ny, dA
        else:
            return lon, lat, ulon, ulat, nx, ny
    else:
        if return_dA:
            return lon, lat, nx, ny, dA
        else:
            return lon, lat, nx, ny


# ISMIP7 standard grid, converted to lat/lon points for interpolation
class ISMIP7Grid:

    def __init__ (self, file_path='/gws/nopw/j04/bas_pog/kaight/ismip7_interp/ismip_8km_60m_grid.nc'):

        self.x = read_netcdf(file_path, 'x')
        self.nx = np.size(self.x)
        self.y = read_netcdf(file_path, 'y')
        self.ny = np.size(self.y)
        self.lon = read_netcdf(file_path, 'lon')
        self.lat = read_netcdf(file_path, 'lat')
        self.z = read_netcdf(file_path, 'z_extrap')
        self.nz = np.size(self.z)