APR driver probe failure on Hamoa on qcom-6.18.y

[sgaud-quic]

APR driver probe failure on Hamoa on qcom-6.18.y

Board : hamoa-iot-evk
Kernel Version : qcom-6.18.y
Lava job : https://lava.infra.foundries.io/scheduler/job/397025

25.572573] qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: failed to create endpoint
[   25.581904] qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: probe with driver qcom,apr failed with error -12

[quic-tingweiz]

ADSP back to back crash is the root cause. LXQUALCOMM to collect ramdump and check. Do we have a new firmware recently?
[ 25.991668] remoteproc remoteproc0: crash detected in adsp: type watchdog
[ 25.998699] remoteproc remoteproc0: handling crash #3 in adsp
[ 26.004625] remoteproc remoteproc0: recovering adsp

[LXQUALCOMM]

The same nightly build was used and started more than ten times without reproducing the issue. ADSP started normally in the logs, as shown below.

root@iq-x7181-evk:# dmesg | grep adsp
[ 13.090493] remoteproc remoteproc0: adsp is available
[ 13.170264] remoteproc remoteproc0: powering up adsp
[ 13.182368] remoteproc remoteproc0: Booting fw image qcom/x1e80100/adsp.mbn, size 17922440
[ 13.430998] remoteproc remoteproc0: remote processor adsp is now up
[ 13.451127] PDR: Indication received from msm/adsp/charger_pd, state: 0x1fffffff, trans-id: 1
[ 13.672960] qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:1
[ 13.690089] qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:2
root@iq-x7181-evk:# cat /sys/class/remoteproc/remoteproc*/state
running
running
root@iq-x7181-evk:# uname -a
Linux iq-x7181-evk 6.18.37-02617-g67c8b4abc2e1-dirty #1 SMP PREEMPT Sun Aug 30 11:41:09 UTC 2026 aarch64 GNU/Linux
root@iq-x7181-evk:#

Thanks,
XIN

[sgaud-quic]

LXQUALCOMM can you please update on this ?

[LXQUALCOMM]

LXQUALCOMM can you please update on this ?

I am sure I use the same build in my local, it can't replicate this error