[dependabot]

Bumps oxsecurity/megalinter from 8 to 10.

Release notes

Sourced from oxsecurity/megalinter's releases.

v10.0.0

What's Changed

• Breaking changes

  • Removed 14 deprecated or long-disabled linters, and the API, MAKEFILE and PUPPET descriptors, which had no other linter left. MegaLinter does not provide Makefile and Puppet linting anymore. See the new Removed linters page for the full list and suggested replacements. (#8606)
  • REPOSITORY_GITLEAKS has been removed: migrate to REPOSITORY_BETTERLEAKS, which reads your existing .gitleaks.toml and .gitleaksignore files unchanged. (#8606)
  • Existing .mega-linter.yml files keep working: configuration variables of removed linters are simply ignored (a single notice lists any found in your configuration) and remain valid in the JSON schema. (#8606)
  • API Reporter payload v2 replaces the v1 payload: metric series are renamed (linter_run_* becomes megalinter_linter_run_*, plus new run-level megalinter_run_* series), and the old docs/grafana dashboards are superseded. Re-provision the new dashboards with npx mega-linter-runner --upload-dashboards grafana — see the migration notes. Legacy NOTIF_API_* variables remain supported as aliases. (#8661)
  • Linters now time out after 5 minutes by default (LINTER_TIMEOUT_SECONDS: 300): a linter exceeding it is killed and reported as an error (exit code 124) instead of running (or hanging) unbounded. If some of your linters legitimately run longer, raise the limit globally with LINTER_TIMEOUT_SECONDS, per linter with <LINTER_KEY>_TIMEOUT_SECONDS, or restore the previous unbounded behavior with value 0. (#8665)

• Core

  • Coding agents integration: MegaLinter can now be driven by Claude Code, Cursor CLI, GitHub Copilot CLI, Codex and many other coding agents — see the new Coding Agents documentation page (#8614)
    • Install the MegaLinter agent skills with npx skills add oxsecurity/megalinter
    • Then ask your agent to set up MegaLinter (megalinter-setup), watch CI or local runs (megalinter-check) or fix lint errors (megalinter-fix)
    • Before the first local run, the skills now make sure the user is aware that MegaLinter is Docker-based and needs a good computer configuration and internet connection (the image download can weigh several GB), and suggest watching CI results instead when that is a problem
    • Local runs launched by the skills now cap PARALLEL_PROCESS_NUMBER to 4 on local computers (CI runs keep one parallel linter process per CPU core), so linting does not saturate the machine
    • Local runs launched by the skills now always activate the JSON reporter (not generated by default) to read results reliably, and fall back to the report folder configuration then the console output instead of waiting for report files that a repository configuration may have disabled
  • Excluded directories are now forwarded to project-mode linters, massively speeding up local runs, fixes #8645
    • Linters that scan the whole workspace by themselves (REPOSITORY_TRIVY, REPOSITORY_CHECKOV, REPOSITORY_GRYPE, REPOSITORY_TRUFFLEHOG, REPOSITORY_SEMGREP and 50+ others) used to crawl everything, including build caches and node_modules: a seconds-long CI lint could take hours on a local checkout
    • MegaLinter now automatically passes the excluded directories (defaults, EXCLUDED_DIRECTORIES, ADDITIONAL_EXCLUDED_DIRECTORIES, and directories detected in FILTER_REGEX_EXCLUDE) to each of these linters, through its native exclusion flags or a generated ignore/config file
    • Every forwarded exclusion is logged in the linter's console section, and the ">300 gitignored files" performance warning now names the heaviest directories it found
    • Opt out globally with FORWARD_EXCLUDED_DIRECTORIES: false, or per linter with <LINTER_KEY>_FORWARD_EXCLUDED_DIRECTORIES: false
  • Default excluded directories now also include common build/cache folders: .wireit, .turbo, .nx, .yarn/cache, .pnpm-store, .parcel-cache, .angular, and the Salesforce CLI .sf / .sfdx state folders (#8646)
  • New per-linter timeout: a linter still running after 5 minutes (LINTER_TIMEOUT_SECONDS: 300 by default) is killed along with all its child processes and reported as an error (exit code 124) with an actionable message, while the other linters keep running. Raise the limit globally with LINTER_TIMEOUT_SECONDS, per linter with <LINTER_KEY>_TIMEOUT_SECONDS, or disable it with value 0 (#8665)
  • New prerun analysis mode (mega-linter-runner --prerun, or MEGALINTER_PRERUN=true environment variable): MegaLinter identifies active linters and collects files, then stops before running any linter and suggests configuration improvements, in the console and in megalinter-reports/prerun-report.json (#8653)
    • Suggested exclusions: top-level directories containing only gitignored files (safe: linting scope is unchanged, and project-mode linters stop scanning them), and well-known generated/vendored folder names (site, dist, vendor...) still containing lintable files (to confirm by the user)
    • A lighter matching flavor is also suggested when available
    • The megalinter-check agent skill uses it on the first local run to tune .mega-linter.yml with the user before the real lint
    • Fixed a performance issue where detecting .gitignored files enumerated every individual file inside large ignored folders (node_modules, build output...) instead of stopping at the folder boundary, which could make the file collection step (including prerun) take several minutes on big repositories
  • Much lighter Docker images: the main image download shrinks by 9%, flavors by 9% to 22%, and standalone megalinter-only-* images are 35% to 65% smaller (#8621)

    • If your PRE_COMMANDS compile native code: the compilation toolchain is no longer shipped in the images, install it back with apk add --no-cache gcc make musl-dev

    • Main and flavor images, compressed download size on ghcr.io, linux/amd64 (before = v9.6.0, so deltas also include the linters removed in this version):

      Image	Before	After	Delta
      megalinter (main)	4.55 GB	4.13 GB	-9%
      megalinter-c_cpp	1.61 GB	1.35 GB	-16%
      megalinter-ci_light	724 MB	657 MB	-9%
      megalinter-cupcake	2.52 GB	2.24 GB	-11%
      megalinter-documentation	1.47 GB	1.21 GB	-18%
      megalinter-dotnet	2.23 GB	1.86 GB	-17%
      megalinter-dotnetweb	2.25 GB	1.88 GB	-17%
      megalinter-formatters	936 MB	849 MB	-9%
      megalinter-go	1.55 GB	1.35 GB	-13%
      megalinter-java	1.59 GB	1.32 GB	-17%
      megalinter-javascript	1.49 GB	1.23 GB	-18%
      megalinter-php	1.51 GB	1.26 GB	-17%
      megalinter-python	1.61 GB	1.26 GB	-22%
      megalinter-ruby	1.49 GB	1.22 GB	-18%
      megalinter-rust	1.99 GB	1.80 GB	-10%

... (truncated)

Changelog

Sourced from oxsecurity/megalinter's changelog.

[v10.0.0] - 2026-08-08

• Breaking changes

  • Removed 14 deprecated or long-disabled linters, and the API, MAKEFILE and PUPPET descriptors, which had no other linter left. MegaLinter does not provide Makefile and Puppet linting anymore. See the new Removed linters page for the full list and suggested replacements. (#8606)
  • REPOSITORY_GITLEAKS has been removed: migrate to REPOSITORY_BETTERLEAKS, which reads your existing .gitleaks.toml and .gitleaksignore files unchanged. (#8606)
  • Existing .mega-linter.yml files keep working: configuration variables of removed linters are simply ignored (a single notice lists any found in your configuration) and remain valid in the JSON schema. (#8606)
  • API Reporter payload v2 replaces the v1 payload: metric series are renamed (linter_run_* becomes megalinter_linter_run_*, plus new run-level megalinter_run_* series), and the old docs/grafana dashboards are superseded. Re-provision the new dashboards with npx mega-linter-runner --upload-dashboards grafana — see the migration notes. Legacy NOTIF_API_* variables remain supported as aliases. (#8661)
  • Linters now time out after 5 minutes by default (LINTER_TIMEOUT_SECONDS: 300): a linter exceeding it is killed and reported as an error (exit code 124) instead of running (or hanging) unbounded. If some of your linters legitimately run longer, raise the limit globally with LINTER_TIMEOUT_SECONDS, per linter with <LINTER_KEY>_TIMEOUT_SECONDS, or restore the previous unbounded behavior with value 0. (#8665)

• Core

  • Coding agents integration: MegaLinter can now be driven by Claude Code, Cursor CLI, GitHub Copilot CLI, Codex and many other coding agents — see the new Coding Agents documentation page (#8614)
    • Install the MegaLinter agent skills with npx skills add oxsecurity/megalinter
    • Then ask your agent to set up MegaLinter (megalinter-setup), watch CI or local runs (megalinter-check) or fix lint errors (megalinter-fix)
    • Before the first local run, the skills now make sure the user is aware that MegaLinter is Docker-based and needs a good computer configuration and internet connection (the image download can weigh several GB), and suggest watching CI results instead when that is a problem
    • Local runs launched by the skills now cap PARALLEL_PROCESS_NUMBER to 4 on local computers (CI runs keep one parallel linter process per CPU core), so linting does not saturate the machine
    • Local runs launched by the skills now always activate the JSON reporter (not generated by default) to read results reliably, and fall back to the report folder configuration then the console output instead of waiting for report files that a repository configuration may have disabled
  • Excluded directories are now forwarded to project-mode linters, massively speeding up local runs, fixes #8645
    • Linters that scan the whole workspace by themselves (REPOSITORY_TRIVY, REPOSITORY_CHECKOV, REPOSITORY_GRYPE, REPOSITORY_TRUFFLEHOG, REPOSITORY_SEMGREP and 50+ others) used to crawl everything, including build caches and node_modules: a seconds-long CI lint could take hours on a local checkout
    • MegaLinter now automatically passes the excluded directories (defaults, EXCLUDED_DIRECTORIES, ADDITIONAL_EXCLUDED_DIRECTORIES, and directories detected in FILTER_REGEX_EXCLUDE) to each of these linters, through its native exclusion flags or a generated ignore/config file
    • Every forwarded exclusion is logged in the linter's console section, and the ">300 gitignored files" performance warning now names the heaviest directories it found
    • Opt out globally with FORWARD_EXCLUDED_DIRECTORIES: false, or per linter with <LINTER_KEY>_FORWARD_EXCLUDED_DIRECTORIES: false
  • Default excluded directories now also include common build/cache folders: .wireit, .turbo, .nx, .yarn/cache, .pnpm-store, .parcel-cache, .angular, and the Salesforce CLI .sf / .sfdx state folders (#8646)
  • New per-linter timeout: a linter still running after 5 minutes (LINTER_TIMEOUT_SECONDS: 300 by default) is killed along with all its child processes and reported as an error (exit code 124) with an actionable message, while the other linters keep running. Raise the limit globally with LINTER_TIMEOUT_SECONDS, per linter with <LINTER_KEY>_TIMEOUT_SECONDS, or disable it with value 0 (#8665)
  • New prerun analysis mode (mega-linter-runner --prerun, or MEGALINTER_PRERUN=true environment variable): MegaLinter identifies active linters and collects files, then stops before running any linter and suggests configuration improvements, in the console and in megalinter-reports/prerun-report.json (#8653)
    • Suggested exclusions: top-level directories containing only gitignored files (safe: linting scope is unchanged, and project-mode linters stop scanning them), and well-known generated/vendored folder names (site, dist, vendor...) still containing lintable files (to confirm by the user)
    • A lighter matching flavor is also suggested when available
    • The megalinter-check agent skill uses it on the first local run to tune .mega-linter.yml with the user before the real lint
    • Fixed a performance issue where detecting .gitignored files enumerated every individual file inside large ignored folders (node_modules, build output...) instead of stopping at the folder boundary, which could make the file collection step (including prerun) take several minutes on big repositories
  • Much lighter Docker images: the main image download shrinks by 9%, flavors by 9% to 22%, and standalone megalinter-only-* images are 35% to 65% smaller (#8621)

    • If your PRE_COMMANDS compile native code: the compilation toolchain is no longer shipped in the images, install it back with apk add --no-cache gcc make musl-dev

    • Main and flavor images, compressed download size on ghcr.io, linux/amd64 (before = v9.6.0, so deltas also include the linters removed in this version):

      Image	Before	After	Delta
      megalinter (main)	4.55 GB	4.13 GB	-9%
      megalinter-c_cpp	1.61 GB	1.35 GB	-16%
      megalinter-ci_light	724 MB	657 MB	-9%
      megalinter-cupcake	2.52 GB	2.24 GB	-11%
      megalinter-documentation	1.47 GB	1.21 GB	-18%
      megalinter-dotnet	2.23 GB	1.86 GB	-17%
      megalinter-dotnetweb	2.25 GB	1.88 GB	-17%
      megalinter-formatters	936 MB	849 MB	-9%
      megalinter-go	1.55 GB	1.35 GB	-13%
      megalinter-java	1.59 GB	1.32 GB	-17%
      megalinter-javascript	1.49 GB	1.23 GB	-18%
      megalinter-php	1.51 GB	1.26 GB	-17%
      megalinter-python	1.61 GB	1.26 GB	-22%
      megalinter-ruby	1.49 GB	1.22 GB	-18%
      megalinter-rust	1.99 GB	1.80 GB	-10%
      megalinter-salesforce	2.09 GB	1.87 GB	-10%

... (truncated)

Commits

• 15e5b45 Release MegaLinter v10.0.0
• 861855a megalinter-setup skill: enforce ghcr.io image references in upgrade mode (#8694)
• 572dc81 [automation] Auto-update linters version, help and documentation (#8695)
• 2f62977 Refresh OX Security PR comment banner and home page banner (#8692)
• 3b8c632 chore(deps): update dependency mongodb/kingfisher to v1.112.0 (#8691)
• 7efac01 chore(deps): update mstruebing/editorconfig-checker docker tag to v3.10.0 (#8...
• 8cea326 Make custom flavor generator output pass MegaLinter (#8686)
• a057dcb [automation] Auto-update linters version, help and documentation (#8690)
• 6dece72 chore(deps): update dependency virtualenv to v21.7.2 (#8683)
• 08a6d16 docs: highlight impactful contributors in the Special thanks section (#8688)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[mergify]

This pull request does not currently match the merge queue conditions, so it cannot be queued from here. The box comes back if it matches again.

[github-actions]

❌MegaLinter analysis: Error

Descriptor	Linter	Files	Fixed	Errors	Max errors	Warnings	Elapsed time
✅ ACTION	actionlint	1		0		0	0.01s
❌ ACTION	zizmor	1		1		0	0.28s
⚠️ COPYPASTE	jscpd	yes		16		no	1.04s
✅ EDITORCONFIG	editorconfig-checker	1		0		0	0.01s
✅ REPOSITORY	betterleaks	yes		no		no	1.35s
✅ REPOSITORY	checkov	yes		no		no	21.97s
⚠️ REPOSITORY	devskim	yes		1		no	2.49s
✅ REPOSITORY	dustilock	yes		no		no	0.02s
✅ REPOSITORY	git_diff	yes		no		no	0.02s
✅ REPOSITORY	grype	yes		no		no	65.44s
✅ REPOSITORY	kingfisher	yes		no		no	22.39s
❌ REPOSITORY	osv-scanner	yes		34		no	4.32s
✅ REPOSITORY	secretlint	yes		no		no	2.22s
✅ REPOSITORY	syft	yes		no		no	2.65s
✅ REPOSITORY	trivy	yes		no		no	12.11s
✅ REPOSITORY	trivy-sbom	yes		no		no	0.25s
✅ REPOSITORY	trufflehog	yes		no		no	4.59s
✅ SPELL	cspell	2		0		0	3.11s
✅ SPELL	lychee	1		0		0	0.08s
✅ YAML	prettier	1		0		0	0.41s
✅ YAML	v8r	1		0		0	2.57s
✅ YAML	yamllint	1		0		0	0.52s

Detailed Issues

❌ REPOSITORY / osv-scanner - 34 errors

Linter output file not found

❌ ACTION / zizmor - 1 error

Linter output file not found

⚠️ REPOSITORY / devskim - 1 error

Linter output file not found

⚠️ COPYPASTE / jscpd - 16 errors

Linter output file not found

See detailed reports in MegaLinter artifacts
Set VALIDATE_ALL_CODEBASE: true in mega-linter.yml to validate all sources, not only the diff

Show us your support by starring ⭐ the repository

[mergify]

Checks failed

Checks:

Name	Status
CodeFactor	✅
@codefactor-io/CodeFactor	✅
label	✅
@github-actions/label	✅
test	✅
@github-actions/test	✅
Summary	✅
@mergify/Summary	✅
CommitCheck	✅
@commitcheck-app/CommitCheck	✅
docs/readthedocs.org:i-language-rust	✅
pre-commit.ci - pr	✅
@pre-commit-ci/pre-commit.ci - pr	✅
MegaLinter	❌
@github-actions/MegaLinter	❌

[stale]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

[dependabot]

OK, I won't notify you again about this release, but will get in touch when a new version is available. If you'd rather skip all updates until the next major or minor version, let me know by commenting @dependabot ignore this major version or @dependabot ignore this minor version. You can also ignore all major, minor, or patch releases for a dependency by adding an ignore condition with the desired update_types to your config file.

If you change your mind, just re-open this PR and I'll resolve any conflicts on it.