Skip to content

About

A Kerbal Space Program additive "second world" for an existing RasterPropMonitor / MOARdV's Avionics Systems (MAS) multi-function display.

Topics

Resources

Stars

1 star

Watchers

0 watching

Forks

Latest commit

 

History

21 Commits

Folders and files

Repository files navigation

MFD Extension

An additive "second world" for an existing RasterPropMonitor / MOARdV's Avionics Systems (MAS) multi-function display, reachable with a button press, exitable the same way, without replacing, renaming, or otherwise disturbing anything the host IVA already does.

What it does

  • A shared module bay inside an existing MFD, not a new prop of its own: from the host's own home page, press NEXT or PREV (either one works) to enter.
  • Never touches the host's own pages or buttons outside its own bay. Every existing button keeps doing exactly what it always did.
  • Goes back one level at a time: STBY from a bay's content returns to the hub; STBY from the hub returns to the host's home.
  • An open contract for adding a new bay: see HOSTING.md if you want to host your own mod's screen here, or bridge another mod's orphaned RPM-style display the way NavInstruments' is.

Supported mods

Top row (A-G) is flight and command, bottom row (R1-R7) is vessel systems, on the EICAS/ECAM model.

Bay Mod Status
A Situational Awareness hello-world (real design not built yet)
B NavInstruments working
C KRAB-9000 hello-world (real design not built yet)
D KRILL hello-world (real design not built yet)
R1 CAS (built in) working
R2 Real Battery working
R3 ELEC (built in) — reads DynamicBatteryStorage working
R4 TCS (built in) — reads SystemHeat working

NavInstruments

Bridges its own HSI/ILS display, rescued from patches that go silently dead on any install where Avionics Systems promotes RasterPropMonitor screens to its own equivalent.

Crew Alert System (CAS)

A textual WARNING/CAUTION/ADVISORY fault summary, self-contained (not a hosted mod's bay). Reads DangIt, FAR, RealBattery (runaway/overheat/end-of-life) and SystemHeat (loop overtemp, reactor core, SCRAM, meltdown, core damage, boil-off) if any is installed, otherwise shows a "no fault sources" message. Scrolls with the monitor's own ▲/▼/○ keys; x mutes DangIt's aural alarm from the cockpit without clearing anything from the screen.

Electricity (ELEC)

The vessel's electrical ledger on three pages (press R3 to cycle, or step with NEXT/PREV): a summary (net flow, generated/consumed, EC level, timewarp buffer, top loads and sources), then every source and every load grouped by category with subtotals, scrollable. ENTER (the green arrow) switches between PLANT (batteries kept out of the totals and shown on their own STORAGE with Real Battery installed: DynamicBatteryStorage's own net figure sits near zero, because storage always absorbs or supplies the balance) and TOTAL (DynamicBatteryStorage's own numbers). RIGHT / LEFT switch the lists and the summary's top sections between one row per part and one row per group of identical parts ((6) OX-STAT-XL Photovoltaic Panel, values summed), compact by default.

Thermal Control System (TCS)

The vessel's thermal picture on three pages (press R4 to cycle, or step with NEXT/PREV): a summary (heat generated/rejected, one row per heat loop with temperature vs nominal, net flux and a NOMINAL/HEATING/OVERTEMP/CRITICAL status on SystemHeat's own thresholds, reactor/cryo-tank/heat-sink counts), then every loop with its members (what each source adds, what the loop actually allocated to each radiator or sink), then every reactor (state, power, heat, core temperature, throttle, core integrity, fuel life). Fusion reactors from Far Future Technologies are listed too, with what SystemHeat's own panel reads from them. On the loops page RIGHT / LEFT switch between one row per part and one row per group of identical parts ((6) Thermal Control System (large), fluxes summed), compact by default. Says so plainly if SystemHeat isn't installed.

Extras (optional)

Three custom colour modes for VesselView Continued, installed alongside it. Each ships as its own DLL under Extras/ (delete any folder you don't want and nothing else changes). All three are unrelated to the MFD bays above and require VesselView; the rest of the framework does not.

Mode What it shows
EFIS SEVERITY Every part on the same WARNING/CAUTION/ADVISORY severity scale CAS uses, replacing VesselView's own STATE-mode colours. A pulsing red border marks genuine malfunctions, separately from mere depletion (an empty tank, a flamed-out engine), which get colour only.
SHELL TEMP Every part by skin temperature, on a continuous 5-colour heat map (orange starts in danger band above 60%/80% of that part's own skin limit).
HOLO A sci-fi holographic look instead of a diagnostic readout: parts are cobalt blue with a light-blue wireframe by default. Only WARNING/CAUTION parts get distinct treatment (fill and wireframe turn red, the outline breathes); everything else stays visually nominal.

EFIS SEVERITY and SHELL TEMP offer a wireframe toggle, switchable in flight from their own submenu.

Requirements

  • Kerbal Space Program 1.12.5
  • ModuleManager
  • MOARdV's Avionics Systems. This release targets the MAS-flavoured BasicMFD prop (MAS_JSI_BasicMFD); it does nothing on an install without MAS. Note that MAS itself commonly promotes plain RasterPropMonitor screens to this same MAS prop across an entire install. Check for MOARdV/Patches/000_JSI-To-MAS.cfg if unsure which one your IVAs actually use.
  • DangIt, Ferram Aerospace Research (FAR), and/or Real Battery are all optional. CAS reads whichever are present by reflection. DynamicBatteryStorage and SystemHeat are also optional, but they're what the ELEC and TCS bays read.

Installation

Copy the contents of this repository into your GameData folder, so you end up with GameData/MFDExtension/....

Known limitations & Future Plans

  • SA/KRAB/KRILL bays are placeholders (real content isn't built yet). Each will ship from its own mod's repository, following the contract in HOSTING.md.
  • Requires Avionics Systems; RPM-only installs (no MAS at all) aren't supported by this release. An earlier RPM-only implementation exists, unverified, in the dev repo's _deprecated/rpm-only/ folder, not part of what's installed from this package. Free to use for anyone wanting to experiment, but no support is offered on this branch.
  • Only one host prop (MAS_JSI_BasicMFD) is supported for now; extending to other MFD props (ALCOR, NearFuture, StarshipMFD...) is a future step.
  • CAS's fault-name abbreviations are keyed on the English strings, so a localized DangIt install falls back to ellipsis truncation for the longer ones.
  • English only for now.

Planned next:

  • Support for other monitor types beyond MAS_JSI_BasicMFD.

License

MIT.

Credits

Author: Rjoande. Built with the help of Claude Code.

About

A Kerbal Space Program additive "second world" for an existing RasterPropMonitor / MOARdV's Avionics Systems (MAS) multi-function display.

Topics

Resources

Stars

1 star

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages