A Dubreq Stylophone S-1 with some added features
- Added a plugin version. See the section "The plugin version".
- Adjusted the keyboard colors.
- Fixed typos in the cutoff values for some patches.
- Adjusted the minimum envelope release time.
- The ENABLED parameter now uses true/false values, and effect bindings use effectIndex.
- Removed empty effects elements.
- Removed amplitude envelope for one shot samples
- Improved crossfades for loop points.
- First version released
- VST3 (macOS)
- AU (macOS)
- Standalone application (macOS)
- Decent Sampler (macOS, Windows and Linux)
The plugin version is currently released for macOS only. Windows and Linux versions are planned. Until then, the Decent Sampler version covers those platforms.
The plugin is a self-contained instrument, available as VST3, AU and Standalone. Samples, graphics and impulse responses are all embedded in the plugin itself, losslessly compressed, so there are no external files to install or locate. Only the samples for the selected preset are loaded into memory, and a fresh instance lets you choose which preset to load before anything is decoded.
The plugin has all the controls and features from the Decent Sampler version, including MIDI learn, the master volume fader with output meter, value readouts for the knobs and full DAW automation. On top of that, the plugin version adds:
- Drift wheels next to the pitch and modulation wheels, adding a subtle random pitch and volume drift to each voice.
- A velocity curve setting in the settings menu.
This version of StyloPoly is an instrument preset / sample library for Decent Sampler. If you're new to Decent Sampler, I recommend checking out this guide first.
| Sample rate | Bit depth | Channels | Number of files | File size | |
|---|---|---|---|---|---|
| Samples | 48 kHz | 24 bit | 1 (mono) | 163 | 68.90 MB |
| Impulse responses (effects) | 48 kHz | 24 bit | 2 (stereo) | 4 | 3.60 MB |
| Impulse responses (speaker) | 48 kHz | 24 bit | 1 (mono) | 1 | 66.00 KB |
- StyloPoly
- The regular preset, with the samples mapped to their original range.
- StyloPoly (Pitch Stretched)
- The samples are stretched across the entire keyboard, far below and above the original Stylophone range.
 |
|---|
| Overview |
The user interface offers precise control over every aspect of the instrument and effects. Explore parameters to refine your sound, including control over the audio mixer, envelope, pitch modulation with LFOs, high pass and low pass filters, velocity/dynamics, speaker simulator and the immersive effects of echo and reverb.
 |
|---|
| Controls for the keyboard settings |
- Mono / Poly
- Mono: Plays only one note at the time, like the original Stylophone
- Poly: Plays multiple notes at the time
- Static / Dynamic
- Determines whether the velocity should affect the volume of the samples
 |
|---|
| Controls for the envelope settings |
Shape your sound precisely with the Attack, Decay, Sustain, and Release parameters. Whether you desire a punchy, staccato tone or a smooth, lingering ambiance, the ADSR envelope allows you to tailor the dynamics to your liking.
- Attack
- Attack time of the amplitude envelope for the three voices
- Decay
- Decay time of the amplitude envelope for the three voices
- Sustain
- Sustain level of the amplitude envelope for the three voices
- Release
- Release time of the amplitude envelope for the three voices
 |
|---|
| Mixer controls |
The original Stylophone only lets you select one voice at a time, but with StyloPoly you can blend between all the three voices at the same time.
- Low
- The sound of the Stylophone with the voice selector in position 1
- Middle
- The sound of the Stylophone with the voice selector in position 2
- High
- The sound of the Stylophone with the voice selector in position 3
 |
|---|
| Noise controls |
- Attack
- Pops and crackles when the stylus hits the "keyboard"
- Release
- Pops and crackles when the stylus releases from the "keyboard"
 |
|---|
| Controls for the vibrato settings |
The depth and rate knobs enable you to modulate the pitch of the sound with the desired depth and rate using a Low-Frequency Oscillator (LFO). With both controls in middle position you have approximately the same vibrato as the original Stylophone.
- Depth
- Adjust the depth to introduce subtle or pronounced variations in pitch
- Rate
- Determines the speed at which the modulation occurs
 |
|---|
| Controls for the output settings |
- Line out
- The direct sound of the line output
- Speaker
- The sound of the internal speaker miced with a Shure SM57
 |
|---|
| Controls for the high pass filter |
 |
|---|
| Controls for the low pass filter |
StyloPoly has a high pass filter and a low pass filter. The high pass filter ranges from 20 Hz to 2000 Hz and the low pass filter ranges from 200 Hz to 22000 Hz.
- Off / On
- Turns on or off the filter
- Frequency
- Cutoff frequency for the filter
- Resonance
- Amount of resonance at cutoff frequency
These effects are achieved using carefully crafted impulse responses. The echo effect employs a Fulltone Tube Tape Echo recorded twice for stereo, while the reverb effect draws from a Chase Bliss Audio & Meris CXM 1978 reverb pedal with a room setting.
 |
|---|
| Controls for the tape echo impulse response |
Select from two distinctive echo options: the short echo, delivering a classic slapback effect, and the long echo, characterized by a slower decay and numerous repeats.
- Off / On
- Turns the echo on and off
- Short / Long
- Switches between a short slapback echo and a long echo with slow repeats and high feedback
- Mix
- Mix between direct signal and echo signal
 |
|---|
| Controls for the room reverb impulse response |
You'll also find two reverb effects: the short reverb, evoking the intimacy of a small room, and the long reverb, enveloping your sound in the vastness of a spacious environment.
- Off / On
- Turns the reverb on and off
- Short / Long
- Switches between a short/small room reverb and a long/big room reverb
- Mix
- Mix between direct signal and reverb signal
 |
|---|
| Controls for the preset select |
Some presets are true to the original Stylophone and some presets take advantage of the additional features of StyloPoly. The presets only affects the controls already available from the GUI. They are not meant to sound like a real piano, harpsichord, clavinet, etc. The preset names are more of a way to describe the timbre.
This repository contains the source for both the Decent Sampler library (the DecentSampler folder) and the plugin version. The plugin is a thin wrapper around the shared Dehli Musikk sampler engine, and a converter translates the Decent Sampler library into the engine's native preset format at build time. The audio files are not part of this repository, since the samples are a paid product. The full version is available from store.dehlimusikk.no.
