303 util is a tool for TB-303 lovers who care more about writing great patterns than fighting the original hardware workflow. Programming a real 303 can be inspiring, but it can also be slow, awkward, and painfully restrictive when you are trying to explore ideas quickly. This app is built to unlock the pattern-writing side of the TB-303 in a much easier and more practical way, while still respecting what makes the machine special.
With 303 util, you can sketch, edit, and compare sequences quickly, work on multiple 303 lines at the same time, and build patterns with up to 32 steps per voice. Instead of getting stuck inside the classic button-combination workflow, you can focus on the musical result: note placement, accents, slides, transpositions, timing, and arrangement across several voices. That makes it much easier to experiment, iterate, and push the pattern capabilities of the 303 further than you comfortably could on the hardware alone.
The goal of the app is not to be a perfect sonic emulator of the TB-303. Its main purpose is pattern creation and documentation. Where it really shines is in helping you design patterns clearly, then export a clean sheet you can use to transfer those ideas back to a real 303 later, using the original hardware programming method if you want. In that sense, it is a workflow tool made by and for people who love the TB-303, including the old painful way of entering patterns, but want a better way to get there.
- Open the app and click the pattern name strip to choose a library and pattern, or click New to start a new one.
- Set the pattern length with the length selector in the top bar.
- Select the pattern section (
AorB) from the top bar. - In Editor, click notes into the pitch grid.
- Set each step in the TIME row to
N(note),T(tie), orR(rest). - Add DOWN, UP, ACC, and SLIDE where needed.
- Press Play to hear the pattern.
- Click Save to store it in the current library.
- Switch to Sheet, click Refresh, then Save PNG to export the chart.
The main screen is built around a few controls you will use constantly:
| Area | What it does |
|---|---|
| TB-303 util button | Opens the main menu and project options |
| Pattern name strip | Shows the current library > pattern and opens the library/pattern picker |
| Length selector | Sets the active voice length directly from the top bar, up to 32 steps |
| A/B selector | Switches between the two classic TB-303 pattern sections |
| Play / New / Init / Save | Playback, create pattern, clear the current pattern, and save |
| Controls / Mods | On compact layouts, show or hide the sound controls and step modifier lanes |
| Voice buttons | Choose voice 1, 2, or 3 for editing |
| Editor / Sheet | Switch between sequencing and printable export |
The app organizes your work into libraries and patterns:
- A library is a collection.
- A pattern is one saved project inside that collection.
- The name strip always shows which library and pattern you are editing.
Important behavior:
- Changes in the editor and controls happen immediately.
- Those changes are not stored in the library until you click Save.
- If you switch to another pattern before saving, your current unsaved edits can be lost.
Click the name strip at the top of the app. On some layouts, the same actions are also available from the main menu.
Use either:
- New in the top bar, or
- the Pattern section inside the menu
New patterns open as blank projects so you can start sequencing right away.
Click Init to clear the current pattern back to an empty state.
- This removes notes and modifiers from all active voices.
- It keeps the current voice lengths and timing mode.
- The app asks for confirmation before resetting.
Click Save.
- If the current pattern already exists, it is updated.
- If it is still unsaved, the app asks for a name and creates it in the current library.
Open the library and pattern picker from the name strip, then use it to:
- choose a different library
- create a new library
- delete the current library
The default library (dlib) cannot be deleted.
The Editor is where you write the sequence for the selected voice.
Click any cell in the pitch grid to place a note on that step. Click the same note again to clear it.
Use the TIME row at the bottom:
- N = note
- T = tie
- R = rest
The rows above TIME add performance behavior to note steps:
- DOWN: transpose the note down one octave
- UP: transpose the note up one octave
- ACC: accent the note
- SLIDE: glide into the note from the previous one
Use the voice buttons to choose which line you are editing.
Each voice has its own:
- notes and modifiers
- pattern length
- waveform and synth settings
- delay, distortion, and reverb settings
Playback runs all active voices together, but you edit one voice at a time.
You can change the active voice length in two places:
- use the length selector in the top bar for quick changes
- use Len inside the menu on compact layouts
Each voice supports 4 to 32 steps, and length is stored per voice, so voice 1, 2, and 3 can use different step counts.
The control strip always edits the currently selected voice.
- BPM: overall tempo
- 1/2: halves the current tempo until you toggle it back, including while slaved to MIDI clock
- Wave: switches between saw and square
- Tune: pitch offset
- Cutoff
- Resonance / RES
- Env Mod / ENV
- Decay
- Accent / ACC
- Volume / VOL
- SYNC / FREE or S / F: tempo-synced delay or manual delay time
- Subdivision: rhythmic delay value when sync is on
- Delay Time / TIME
- Feedback / FDBK
- Mix
- Tone
- Overdrive / DRV
- Distortion / DIST
- Reverb / REV
On phones and small screens, use Controls to show or hide the knob section and Mods to show or hide the sequencing lanes.
Use the MIDI tab in the menu when you want the app to follow an external clock source in either the browser or the installed app.
- Off: disables external MIDI clock input completely
- Auto: arms MIDI clock sync and automatically follows the first active clock source
- MIDI In: arms MIDI clock sync but only listens to the device you choose manually
- Runtime shows whether you are using the browser or app MIDI path
- Status shows whether MIDI is off, waiting, synced, or in error
- Source shows the current clock source and live BPM once synced
- MIDI input device selects the preferred or required input port
- Refresh rescans available MIDI input devices
- MIDI delay offset shifts the incoming clock timing to compensate for interface or device jitter
- If no MIDI clock is being received, the app keeps using the internal transport and you can still press Play, adjust BPM, and use 1/2
- As soon as MIDI clock arrives, playback switches to external sync and the header BPM badge changes to EXT
- If clock stops, the app falls back to local tempo control again
- Start, Continue, and Stop messages are followed when the selected MIDI mode is armed
- The 1/2 button still works while synced by dividing the external transport speed in half
- Browser and app runtimes share the same MIDI UI and behavior, but the Runtime card tells you which MIDI backend is active
- MIDI sync settings are local app settings, not part of exported pattern JSON
Open the menu and switch to the FX tab when you want deeper effect editing.
The FX tab is split into four effect sections:
- Delay: sync/free mode, subdivision, delay time, feedback, delay mix, and tone
- Reverb: amount, tail, pre-delay, and tone
- Overdrive: drive amount and tone
- Distortion: distortion amount and tone
Each effect has its own Enabled toggle. The app allows up to 3 enabled effects at once, so if three are already active, the next effect button shows 3 Max until you disable one.
Use the menu to reach the project options:
- the Scale tab for Scale and Root highlighting
- the FX tab for detailed effect sections and enable/disable control
- the Pattern tab for the project name and pattern length
- Len for the active voice, with support for up to 32 steps
- Voices to switch between 1, 2, or 3 voice projects
- Import and Export JSON
- Export PNG
- Google Drive to connect cloud sync, then Backup after connection
Scale highlighting is visual guidance only. It helps you see matching notes, but it does not prevent entering notes outside the selected scale.
This is the key output of the app: a clean TB-303 Pattern Chart you can save, print, or share.
- Finish the pattern you want to document.
- Choose the voice or voices you want included.
- Switch to Sheet.
- Click Refresh.
- Click Save PNG.
The exported chart includes:
- the program name
- BPM
- the number of voices exported
- a separate block for each exported voice
- step columns for the current pattern length, including longer 32-step patterns
- TIME, NOTE, DOWN, UP, ACC, and SLIDE rows
This makes the export practical as a real 303 reference sheet, not just a screenshot of the editor.
Use Export JSON when you want a project file you can archive, move to another device, or send to someone else.
Use Import to load a project file back into the app. After importing, click Save if you also want it added to the current library.
Use Google Drive to connect cloud sync. After connection, the same area gives you Backup for manual backup runs. Save your pattern first if you want the latest edits included in backup data.
- Choose or create a Library.
- Create a New Pattern.
- Build the sequence in Editor.
- Shape the sound for each voice.
- Save regularly.
- Open Sheet and export the final chart.
- Export JSON or run backup if you want an extra copy.
- Save before switching libraries or patterns.
- Use separate libraries for different songs, sets, or sessions.
- Use Sheet view as the final check before sharing a pattern.
- On compact layouts, Controls and Mods are your fastest way to switch between sound design and sequencing.









