ci(deps): update github-actions (major)

[renovate-bot-lohn]

This PR contains the following updates:

Package	Type	Update	Change	Pending
actions/checkout	action	major	v6.0.3 → v7.0.1
jdx/mise-action	action	major	v4.2.0 → v5.0.0	v5.0.1

---

Release Notes

actions/checkout (actions/checkout)

v7.0.1

Compare Source

• Skip running unsafe pr check if input is default by @​aiqiaoy in #​2518
• Trim only ascii whitespace for branch by @​aiqiaoy in #​2521
• Escape values passed to --unset by @​aiqiaoy in #​2530
• Various dependency updates

v7.0.0

Compare Source

• Block checking out fork PR for pull_request_target and workflow_run by @​aiqiaoy in #​2454
• Various dependency updates

v6.1.0

Compare Source

What's Changed

• [BREAKING] backport allow-unsafe-pr-checkout to v6 by @​aiqiaoy in #​2500
• backport fixes to releases-v6 by @​aiqiaoy in #​2527

https://github.blog/changelog/2026-06-18-safer-pull_request_target-defaults-for-github-actions-checkout/ for more details about this breaking change

Full Changelog: actions/checkout@v6.0.3...v6.1.0

jdx/mise-action (jdx/mise-action)

v5.0.0: : Default minimum release age of 24 hours for mise

Compare Source

If you don't pin a version, mise-action now installs the newest stable mise release that is at least 24 hours old. Upgrading mise on a runner that already has it is also less likely to hit GitHub API rate limits.

Breaking Changes

minimum_release_age now defaults to 24h (#​632 by @​jdx)

Before this release, minimum_release_age was an opt-in setting. It now defaults to 24h. If you don't set version, the action picks the highest-numbered stable mise release published at least 24 hours ago. A mise release that just shipped won't be installed until it's a day old.

To get the latest stable release right away, as in v4, set the delay to 0s. You can also choose a longer delay:

- uses: jdx/mise-action@v5
  with:
    minimum_release_age: 0s   # or e.g. 7d

• An explicit version input still takes precedence and skips the delay.
• The setting applies only to the mise binary, not to tools installed by mise.
• The action now gets the release list from a public CDN index (releases.tsv on mise.jdx.dev) instead of paging through the GitHub Releases API. Picking a release doesn't use GitHub API quota, even when an installed binary is reused. If the index is missing or malformed, the action fails instead of skipping the release-age check.
• Replacing an older installed binary still runs mise self-update, which may call the GitHub API to fetch that exact release.

Fixed

• mise self-update now runs with MISE_GITHUB_TOKEN. When a runner already had a different mise version installed, the action runs mise self-update to switch versions. That GitHub API call used to go out without authentication, so busy shared or self-hosted runners could hit the rate limit and fail with HTTP 403 RateLimitedError. If you already set a token in your environment, the action leaves it unchanged. (#​619 by @​hegde5)

New Contributors

• @​hegde5 made their first contribution in #​619

Full Changelog: jdx/mise-action@v4.3.0...v5.0.0

v4.3.0: : Install age-filtered mise releases

Compare Source

A small release that adds an opt-in way to hold back from installing brand-new mise releases.

Added

minimum_release_age input (#​604 by @​jdx)

When version is omitted, you can now set minimum_release_age to install the newest stable, non-draft mise release that is older than a given cutoff — a simple way to avoid picking up a mise release the moment it ships (closes #​603).

- uses: jdx/mise-action@v4
  with:
    minimum_release_age: 7d

It accepts relative durations (24h, 7d, 6mo, 1y) as well as absolute ISO dates and timestamps. Age-filtered versions are resolved from the GitHub Releases API (the CDN only serves the latest binary) and downloaded by their exact version. If mise is already present on disk, an age-filtered run updates it to the resolved version rather than keeping the existing binary. An explicit version always takes precedence over minimum_release_age, and invalid dates fail fast.

Full Changelog: jdx/mise-action@v4.2.5...v4.3.0

v4.2.5: : Resilient mise downloads with automatic retries

Compare Source

A small patch release that makes setup more resilient to transient network failures when downloading mise.

Fixed

Retry mise downloads after transient failures (#​597 by @​jdx)

The download helpers previously made a single curl or wget attempt, so a transient GitHub release-asset HTTP or TLS failure would abort setup before mise or any user command could run (see #​596).

Downloads now run through a retry wrapper that makes up to five attempts with a 2s pause between failures, logging a warning on each retry. This applies consistently to binary, checksum, signature, and version fetches. Checksum and minisign verification still run only after a successful download — never inside the retry loop — so integrity guarantees are unchanged.

Full Changelog: jdx/mise-action@v4.2.4...v4.2.5

v4.2.4: : Reliable locking detection under forced color

Compare Source

A small patch release that fixes locking-support detection when workflows force colored output.

Fixed

Detect mise install --locked reliably under forced color (#​580 by @​scop)

When colored output was forced globally (for example via CLICOLOR_FORCE=1), ANSI escape codes in mise install --help prevented the action from matching --locked in the help text, so locking support was reported as unavailable even on versions of mise that supported it.

The help probe now runs with NO_COLOR=1 in its environment, which overrides CLICOLOR_FORCE and guarantees plain-text output for the feature detection — regardless of the surrounding workflow's color settings.

Full Changelog: jdx/mise-action@v4.2.3...v4.2.4

v4.2.3: : Restore mise PATH propagation

Compare Source

A patch release that restores mise's PATH propagation to subsequent workflow steps — without reintroducing the full-PATH snapshot behavior that v4.2.1 fixed.

Fixed

Export mise PATH entries to subsequent steps (#​575) by @​jdx

v4.2.1 stopped exporting the complete PATH returned by mise env --json into GITHUB_ENV, which correctly prevented snapshotting the runner's environment into subsequent steps. However, that also dropped mise-produced PATH entries — tool shims, [env] _.path directories, and similar — that workflows relied on after the setup step. See #​565.

The action now computes only the prefix that mise prepended to the existing PATH and forwards those directories individually through GITHUB_PATH. This preserves mise's configured ordering, composes cleanly with PATH changes from other actions, and never persists the runner's full PATH through GITHUB_ENV. The dotenv fallback path (used with older mise versions) also strips PATH= lines and re-derives additions from mise env --json.

A new export_path input (default true) lets workflows keep regular env exports while opting out of PATH changes:

- uses: jdx/mise-action@v4
  with:
    export_path: false # keep env vars, skip mise PATH additions

Full Changelog: jdx/mise-action@v4.2.2...v4.2.3

v4.2.2: : Zstd tar fallback for older runners

Compare Source

A small patch release that fixes archive selection on runners with an older tar and corrects a stale default in the README.

Fixed

Verify tar supports Zstd before picking .tar.zst (#​569 by @​JackMyers001

The action previously chose the .tar.zst mise archive whenever zstd --version succeeded, then extracted it with tar --zstd. On RHEL 8-compatible runners that ship zstd 1.4.4 alongside GNU tar 1.30, the --zstd option isn't recognized and installation failed.

Detection now runs both checks:

zstd --version
tar --zstd --version

If either fails, the action falls back to the .tar.gz archive. No configuration change is required — existing workflows on affected runners just start working again. Fixes #​568.

Documentation

• Update the cache_key_prefix example in the README to reflect the current default of mise-v1 (previously documented as mise-v0) (#​570 by @​muzimuzhi).

New Contributors

• @​JackMyers001 made their first contribution in #​569
• @​muzimuzhi made their first contribution in #​570

Full Changelog: jdx/mise-action@v4.2.1...v4.2.2

v4.2.1: : Signed checksums and PATH export fix

Compare Source

A small patch release with two user-facing fixes: mise downloads are now verified against minisign-signed release checksums by default, and the env input no longer leaks the runner's PATH into subsequent steps.

Fixed

Verify mise downloads with signed checksums (#​548) by @​jdx

The action now embeds mise's minisign public key and verifies SHASUMS256.txt.minisig before trusting any release checksums, then checks the downloaded mise binary's SHA256 against the verified list. This applies to both GitHub release archives (verified before extraction) and the default mise.jdx.dev CDN path (verified against the signed checksum for the matching release asset). If a CDN download fails verification, the action warns and falls back to the signed GitHub release asset instead of installing an unverified binary.

• The existing sha256 input still works as an explicit override.
• Pinned mise versions older than 2024.12.24 (which predate minisign checksums) get a warning and skip signed verification rather than failing.
• Because tar installs now extract from a verified file on disk, the previous streaming download | tar fast path is replaced with a download-then-verify-then-extract flow.

Thanks to @​potiuk for the detailed threat-model writeup in #​547.

Exclude PATH from environment export (#​556) by @​jdx

The env input has always documented that "PATH modifications are not part of this", but since the switch to mise env --json in #​252 (needed for redaction support), the action was exporting every string value returned by mise — including the computed PATH — into GITHUB_ENV. That effectively snapshotted the runner's entire PATH into subsequent steps and let [env] _.path entries in mise.toml leak past the action's own PATH management.

exportMiseEnv now skips PATH (case-insensitive) when exporting JSON env vars, restoring the documented behavior. Normal mise env vars are still exported, and PATH continues to be managed by the action's own setup (e.g. add_shims_to_path). Fixes #​555.

Full Changelog: jdx/mise-action@v4.2.0...v4.2.1

---

Configuration

📅 Schedule: (in timezone Asia/Tokyo)

• Branch creation
  • At any time (no schedule defined)
• Automerge
  • At any time (no schedule defined)

🚦 Automerge: Enabled.

♻ Rebasing: Whenever PR is behind base branch, or you tick the rebase/retry checkbox.

👻 Immortal: This PR will be recreated if closed unmerged. Get config help if that's undesired.

---

• If you want to rebase/retry this PR, check this box

---

This PR has been generated by Mend Renovate.